K1200GRP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are solid-state devices that are used to switch large amounts of power in high voltage, low frequency, and high current applications. They are typically used to control AC motors, light fixtures, and electrical power systems. The K1200GRP is a type of thyristor used in industrial applications. In this article, we will discuss the K1200GRP application field and working principle.

K1200GRP Application Field

The K1200GRP is used in high-power AC industrial applications. It is designed to provide long-term reliable switching performance, even under extreme environmental conditions. For instance, the K1200GRP can operate in temperatures that range from -55°C to +125°C and it can handle current pulses up to 1500A. It has an average on-state current of 1500A and an instantaneous on-state current of 2500A. In addition, it can handle an off-state voltage of up to 1100V with a reverse voltage of 600V. Due to its long-term reliability and rugged construction, the K1200GRP is suitable for use in harsh industrial environments.

K1200GRP Working Principle

The K1200GRP is a type of thyristor, which is similar to a diode but with three layers. It is a three-layer semiconductor switching device, with two layers of P-type material (base and anode) and one layer of N-type material (cathode). The anode and cathode are connected together and form the gate of the thyristor. When a small current flows through the gate, the thyristor is triggered, and it allows a large current to flow between the anode and the cathode. The thyristor will remain in the on-state until the current between the anode and cathode drops below a certain threshold. Once this threshold is reached, the thyristor switches off automatically. The K1200GRP uses a variety of control techniques to ensure that it can be used safely in high-power AC applications.

DIACs, SIDACs, and K1200GRPs

DIACs and SIDACs are also three-layer devices, similar to the K1200GRP. However, they are used for switching low and medium current applications rather than for high-power AC switching. The main difference between DIACs and SIDACs is that the DIACs control current in both directions, while the SIDACs control current in only one direction. Both are normally-closed switching devices, and both of them can be used to control current in low and medium current applications. In contrast, the K1200GRP is a normally-open switching device and can be used for high-power AC switching applications.

Conclusion

The K1200GRP is a type of thyristor which is used in high-power AC industrial applications. It is designed to provide long-term reliability and maintainable performance, even under extreme environmental conditions. It uses a variety of control techniques to ensure that the device can operate safely in high-power AC applications. While it is similar to DIACs and SIDACs, the K1200GRP is designed for high-power AC switching rather than low and medium current applications.

The specific data is subject to PDF, and the above content is for reference