KBU2501-G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The KBU2501-G is a device from a Diodes in-Bridge Rectifier category that is commonly used for rectification purposes. This diode is used in a wide variety of circuit applications and works based on the properties of a diode’s forward-biased and reverse-biased junction. It is composed of four individually electrically isolated switching elements, usually with an anode on each end and two cathodes in the middle. The KBU2501-G has a nominal failure current of 0.6 Amps and a maximum blocking voltage of 600 Volts.

This device is generally used in the protection of components and circuits that require power. It is also used in applications such as full-wave rectification, half-wave rectification, and voltage conversion. In rectification circuits, the KBU2501-G can be used to convert alternating current (AC) to direct current (DC). This device can also be used for voltage conversion, where it is used to step-up or step-down the DC voltage of a circuit.

The working principle behind the KBU2501-G diode is based on the behavior of a diode’s forward-biased and reverse-biased junction. By applying a voltage across the diode, the applied voltage will cause a current to flow through the diode. This current will only flow in one direction, depending on the voltage applied. If the voltage is positive, the forward-biased junction will allow current flow. On the other hand, if the applied voltage is negative, the reverse-biased junction will prevent current flow.

The two junctions on the diode can be used to control the current flow in the circuit. The two junctions can either be connected in series or parallel based on the desired application. In series connection, the two junctions are connected in series with the common anode and cathode. This connection will allow the current to pass through the two junctions in the same direction, resulting in a full-wave rectification. On the other hand, in a parallel connection, the two junctions are connected in parallel with the common anode being tied to one end and the cathode being tied to the other. This connection will allow current to flow through the two junctions in opposite directions, resulting in a half-wave rectification.

In summary, the KBU2501-G is a rectifier diode commonly used for power protection and voltage conversion. Its functional principle is based on the behavior of its forward-biased and reverse-biased junction. It has a high current capacity, a low forward voltage drop, reverse-current protection, and a high surge withstanding capability. It can be used in various rectification and voltage conversion applications depending on the connection of its two junctions.

The specific data is subject to PDF, and the above content is for reference