LTC1663CS5#TRMPBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LTC1663CS5#TRMPBF is a Data Acquisition - Digital to Analog Converters (DAC) part that is used to convert digital signals into analog signals. The device is a single 8-bit DAC with an integrated 8.35 ppm internal reference. The DAC is a 3-wire serial port device with a SPI-compatible input protocol and a 5V single-ended output. It also has an integrated 70 dB settling time which allows it to provide fast output updates with little settling time.

The device is optimized for power supply and low noise applications. It has a low power consumption of only 5.5 mW at 200 kHz, and has a low-noise power supply design which reduces the noise floor up to 6.5 µVrms. The device also has an internal reference voltage of 4.096 V which provides a very stable and reliable reference voltage over the extended temperature range.

The operating voltage range of the device is 2.7V to 5.5V. It has an 8-bit resolution with 0.25% accuracy. The device also features a fast settling time of 2 microseconds, which makes it ideal for high-speed data acquisition applications. The device also has an overvoltage protection feature which prevents damage if the output voltage is greater than 5.5V.

The input protocol of the device is serial peripheral interface (SPI), and the output is 5V single-ended. The device can be used to connect a digital signal to an analog circuit, or to convert analog signals into digital ones. It is also commonly used in embedded applications like microcontrollers, FPGAs, and other digital logic circuits.

The LTC1663CS5#TRMPBF is also used in telecommunication equipment and test instrumentation applications. The device features an integrated 50 ppmXTR precision oscillator that can be used to set the frequency on transmitters and receivers. It is also used in modems, transceivers, RF power amplifiers, and RF filters.

In summary, the LTC1663CS5#TRMPBF is a Data Acquisition - Digital to Analog Converters (DAC) part that is used to convert digital signals into analog signals. It has a low power consumption, fast settling time, an integrated 8.35 ppm internal reference, and an overvoltage protection feature. The device is commonly used in embedded applications like microcontrollers, FPGAs, and other digital logic circuits. It is also used in telecommunication equipment and test instrumentation applications.

The specific data is subject to PDF, and the above content is for reference