LTM4630EV#PBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are a family of electronic devices that are used to convert a direct current (DC) power source from one voltage level to another. The LTM4630EV#PBF from Linear Technology is a type of DC-DC converter that uses switched-mode power conversion technology to convert and regulate a DC power input into a lower regulated and isolated output voltage. This device is typically used in power systems for the conversion of a high voltage, high current battery voltage to a regulated output, such as 5 V or 12 V, with very high efficiency.

The device features a 4 mm × 5 mm plastic BGA package with twelve internal switching FETs and a high switching frequency of 2.25 MHz to minimize size. Its topology is synchronous buck and is designed with a synchronous controller to provide accurate current and voltage regulation. With a maximum input voltage of 36 V, a maximum output current of 6 A with the adequate heatsink, and a wide adjustment range of 0.8 V to 4.5 V, the LTM4630EV#PBF is suitable for applications such as medical, industrial, and telecommunication. Furthermore, the control scheme of the device uses voltage mode operation for optimal transient response allowing it to effectively provide high precision voltage and current regulation.

The LTM4630EV#PBF is an isolated DC power converter with a very wide input voltage range. It operates according to switched-mode topology based on the synchronous buck control. The device is designed with four internal N-channel MOSFETs and four external low on-resistance Schottky diodes to allow high current and high efficiency operation. In addition, the device offers a very wide input voltage range of 2.7 V to 36 V and a wide output voltage range of 0.8 V to 4.5 V.

To control the device for the proper regulation, it is equipped with a voltage error amplifier, power-good comparator, VOUT comparator, current sense amplifier, PWM comparator, power-on reset, soft-start, frequency foldback, digital soft-start, thermal shutdown, and slew-rate limiters. The LTM4630EV#PBF also features a low ripple switching pulse modulation (SPM) technique to help reduce input and output ripple voltages and a programmable current limit that can be set using two external resistors. Lastly, the device is capable of operating in either continuous or discontinuous conduction modes which are both determined by the load\'s current draw.

The LTM4630EV#PBF DC-DC converter from Linear Technology provides regulated, isolated output voltage from a wide range of DC inputs. It is designed with integrated FETs, inductors, and Schottky diodes and has a high power density. The device achieves very high efficiency and is capable of output currents up to 6 A. In addition, it is equipped with a variety of features including current and voltage regulation, SPM low ripple control, programmable current limit, over-temperature protection, soft-start, and digital soft-start. These features make the LTM4630EV#PBF ideal for a wide range of applications such as medical, industrial, and telecommunication.

The specific data is subject to PDF, and the above content is for reference