M39003/01-5696/TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum capacitors are widely used in a variety of applications, from consumer electronics to aerospace and medical applications. The M39003/01-5696/TR is an axial lead, molded tantalum capacitor with high capacitance, high rated voltage, and low leakage current.

Uses for the M39003/01-5696/TR

The M39003/01-5696/TR is a general-purpose capacitor suitable for use in a wide variety of electronic circuits. It is most commonly used in power supplies, audio amplifiers, and RF circuits. It can also be used in high-impedance analog circuits, such as signal filtering or signal conditioning circuits. Due to its low equivalent series resistance (ESR), it can also be used for high-frequency bypassing applications.

Physical Characteristics

The M39003/01-5696/TR is a cylindrical capacitor with a cylindrical body made of molded plastic. The capacitor has two leads, one that is connected to the negative terminal and the other to the positive terminal. The outer diameter of the capacitor is 5.6mm and it has a maximum height of 9.0mm. The rated voltage of the capacitor is 25V and the capacitance is between 100µF and 2200µF.

Working Principle of the M39003/01-5696/TR

The working principle of the M39003/01-5696/TR is based on the electrostatic field generated between the two conductive plates, one made of tantalum and the other made of a dielectric material. The dielectric material is typically an oxide film that is deposited on the tantalum plate. When a voltage is applied between the two plates, an electric field builds up between them, which causes a flow of electrical charge. This charge is the capacitance of the device.

The capacitance of the M39003/01-5696/TR is mainly dependent on the size of the plates, the dielectric material used in between them, and the distance between them. The capacitance decreases as the distance between the plates increases and increases as the size of the plates increases. The dielectric material used also has a large impact on the capacitance, as it dictates the amount of electrical charge that can be stored.

Summary

The M39003/01-5696/TR is an axial lead, molded tantalum capacitor with high capacitance, high rated voltage, and low leakage current. It is suitable for use in a wide variety of electronic circuits and is most commonly used in power supplies, audio amplifiers, and RF circuits. The working principle of the M39003/01-5696/TR is based on the electrostatic field generated between the two conductive plates, one made of tantalum and the other made of a dielectric material. The capacitance of the M39003/01-5696/TR is mainly dependent on the size of the plates, the dielectric material used in between them, and the distance between them.

The specific data is subject to PDF, and the above content is for reference