MAX4312GEE+B5C

Series:	--
Packaging:	Tube
Part Status:	Active
Applications:	8:1 Multiplexer-Amplifier
Output Type:	Rail-to-Rail
Number of Circuits:	1
-3db Bandwidth:	265MHz
Slew Rate:	345 V/µs
Current - Supply:	7.4mA
Current - Output / Channel:	95mA
Voltage - Supply, Single/Dual (±):	4 V ~ 10.5 V, ±2 V ~ 5.25 V
Mounting Type:	Surface Mount
Package / Case:	16-SSOP (0.154", 3.90mm Width)
Supplier Device Package:	16-QSOP
Base Part Number:	MAX4312

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

MAX4312GEE+B5C is an analog video controller, based on the MAX4312GEE which provides low-power, high-gain video amplifying applications for audio systems. MAX4312GEE+B5C’s specialty is the integrated Op-Amp, which can both amplify and attenuate input signals, providing more precise control of the audio system\'s behavior. This article will discuss the application fields and working principle of MAX4312GEE+B5C.

Application Fields

MAX4312GEE+B5C can be used for various applications, such as amplifying audio signals in sound systems and amplifying video signals. It is also possible to use it to attenuate audio signals, allowing for greater control over the audio quality. The integrated electronic switch can also be used to toggle between the two amplifiers, allowing for more precise gain control. In addition, MAX4312GEE+B5C can be used for various video applications, such as for film and television production. The amplified output can be used in a recording studio, allowing for more precise control over sound capture. The high-gain amplifier can also be used for monitoring, providing a clean and accurate audio signal.

Working Principle

The MAX4312GEE+B5C is based on the MAX4312GEE, which is a low-power, high-gain amplifier. The integrated Op-Amp is used to both amplify and attenuate input signals, providing more precise control of the audio system\'s behavior. The electronic switch can be used to toggle between the two amplifiers, which can be used to adjust the gain. The MAX4312GEE+B5C is powered by a single power supply, allowing it to operate in both single- and dual-supply modes. In single-supply mode, the input signal is amplified by the two amplifiers, while in dual-supply mode, the signal is attenuated. The range of gain is also adjustable, depending on the desired signal level. To control the gain, the integrated Op-Amp is switched on and off, allowing for more precise adjustment. This is coupled with a gain adjustment potentiometer, which allows for finer tuning. A level control is also available for the output, allowing for smooth transitions between levels.

Conclusion

The MAX4312GEE+B5C is a powerful video amplifier module, designed for audio systems and video applications. Its integrated Op-Amp allows for both amplification and attenuation of input signals, while the electronic switch can be used to toggle between amplifiers. It is possible to adjust the gain range, allowing for finer control of the audio system’s behavior. With its ability to power both single- and dual-supply mode, the MAX4312GEE+B5C is a versatile and reliable amplifier module.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description