MBB02070C2450FC100

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through-hole resistors are mounted in components such as electronic assemblies and printed circuit boards (PCBs). The two terminals of a resistor are referred to as plus and minus or often accompanied by marks pointing to the positive and the negative side of the resistor. Through-hole resistors are used in a wide variety of electronic applications.

The MBB02070C2450FC100 is a type of through-hole resistor. It is constructed from two metal lead wires and a carbon core typically made of ceramic material. The two lead wires are fixed to the ceramic core in precise positions and distance from each other. A set of numbers, referred to as a part number, is printed on the body of the resistor. This part number usually begins with MBB or MBP and can be decoded as follows:

• The "MBB" stands for Motorola\'s Basic Building Blocks, meaning that the resistor is from a range of available values with low electrical noise level and tight tolerance.
• The number "02070" indicates that the resistor has a total resistance of 20.7 ohms.
• The letter "C" refers to the material used to construct the core, meaning a Carbon core.
• The next sequence of numbers, "2450", indicate that the resistor has a tolerance of ±2.5%.
• The letter "F" indicates the maximum dissipation power in Watts, in this case, 0.5W.
• The last two characters, "C100" indicate the temperature coefficient of the resistor, meaning a value of +100ppm/°C (parts per million per °C).

The working principle of the MBB02070C2450FC100 through-hole resistor is based on one of the fundamental laws of electricity, Ohm\'s Law. This law states that the voltage or potential difference across a resistor is directly proportional to the current passing through it. This means that the MBB02070C2450FC100 resistor can be used to limit the current passing through a circuit by setting the potential difference between two of its leads.

The MBB02070C2450FC100 is most commonly used in low-frequency electronic circuits, especially audio circuits such as amplifiers. Its low noise, high wattage, and small size make it an ideal choice for applications which require a low-noise environment or a small form factor. It can also be used in power supply circuits, along with other components, to provide a stable current. Additionally, this resistor can be used in oscillator circuits to limit and control the current.

In conclusion, the MBB02070C2450FC100 through-hole resistor is an incredibly useful component used in numerous applications which require precise current control, small footprints, and low-noise environments. Its part number can easily be decoded and the resistor is constructed from quality materials to ensure a high level of performance.

The specific data is subject to PDF, and the above content is for reference