MBB02070C6803FC100

Series:	MBB/SMA 0207 - Professional
Packaging:	Cut Tape (CT)
Part Status:	Active
Resistance:	680 kOhms
Tolerance:	±1%
Power (Watts):	0.6W
Composition:	Thin Film
Features:	Automotive AEC-Q200
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	--
Size / Dimension:	0.098" Dia x 0.256" L (2.50mm x 6.50mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole ResistorsThrough hole resistors make up one of the most important classes of resistors available. These resistors come in a variety of shapes and sizes and each type serves a specific purpose. The MBB02070C6803FC100 is a through-hole resistor built with a resistance range of 0.001 ohm to 1KO ohm and maximum wattage of 0.3 watt or 1 watt. This series of resistors is typically used in applications such as power electronics, motor driver circuits, and switching power supplies.Application FieldsThe MBB02070C6803FC100 through-hole resistor is designed for high current applications such as motor drives, power supplies, and other high-efficiency circuits. These resistors are capable of carrying up to 8A of current, meaning they are able to handle larger currents than similar resistors with lower power ratings. They are also designed to maintain tight voltage tolerances due to their improved heat dissipation abilities.The resistor can also be used in high voltage circuits, such as those found in telecommunications and broadcast amplifiers. Due to the resistor’s low thermal coefficient, it can handle up to 500V with no self-heating or other failures. It is also suitable for applications in power supplies, motor drives, and similar high-efficiency circuits.Working PrincipleThe MBB02070C6803FC100 is a carbon film resistor. This type of resistor is made by depositing a thin resistive film of carbon onto an insulating substrate. The substrate is usually a ceramic, but can also be mica. The carbon film can also be mixed with other materials such as silicon, manganese, or metal oxide to improve reliability.The resistance of the resistor is determined by its length and width. To increase the resistance, the resistor length can be extended. To decrease the resistance, the resistor width can be increased. The resistance is then measured in ohms. These resistors also have a high tolerance, meaning it is capable of producing resistances within a tight tolerance range.ConclusionThe MBB02070C6803FC100 through-hole resistor is an ideal choice for high current applications and high voltage circuits. It is designed to maintain tight voltage tolerances and to withstand high currents, making it perfect for motor drives, power supplies, and other high-efficiency circuits. The resistor is made of a carbon film which is deposited onto a ceramic or mica substrate. Its resistance is determined by its length and width, with the resistance being measured in ohms.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description