MC10EL35DTG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Flip Flops are logic circuits with two stable states and can store binary data. MC10EL35DTG is an advanced logic family product with a wide range of application fields. This article will explain the application field and working principle of MC10EL35DTG.

Application Field

MC10EL35DTG is a Dual-Input Negative-Edge-Triggered Flip Flop. It has two input: D and CLK. D is data input, and CLK is the clock input. It generates complemented outputs Q and QB on each negative clock edge transition. It is designed for 2.7 to 3.6 Voltage operation (VCC) and 75℃ ambient temperature operation. With its wide range of application fields and its highly advanced design, MC10EL35DTG has been adopted by many electronic devices such as digital circuit, microprocessor or mobile phone. MC10EL35DTG is suitable for high-speed and low-power applications. Its inputs, outputs, and VDD make it ideal for those applications where voltage, speed and current consumption matter.

Working Principle

The working principle of MC10EL35DTG is based on two stable states: ‘Set’ and ‘Reset’. The device will remain in the same state until the input signal changes from one state to other. The diagram below shows the logical circuity of MC10EL35DTG:

When an input transition occurs, the clock signal goes low, which causes the output to transition. The Clock signal triggers the device and the Data input determines whether the output will go in ‘Set’ or ‘Reset’ state. The Set output goes high when the Data input is high, and the Reset output is low. Conversely, the Set output goes low and the Reset output is high when the Data input is low. The outputs remain in the same states until the next clock transition.

MC10EL35DTG can store a single bit of information: a ‘1’ in the Data input means ‘Set’ output, and a ‘0’ means ‘Reset’ output. In addition, since this Flip Flop is edge-triggered, the transitions of the Data input and the Clock input will not affect the output until the next clock transition. Thus, the Flip Flop provides reliable latched information in systems where the input signals change frequently.

Overall, MC10EL35DTG is a digital device that is designed for high-speed and low-power applications with wide range of application fields. It is a cost-effective solution which provides reliable stored information in electronic systems.

The specific data is subject to PDF, and the above content is for reference