MCP6144T-I/ST

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MCP6144T-I/ST is an economical and highly-structured, low-power, amplifier component device that has a variety of applications. Its instrumentation-grade linear amplifiers are designed to meet a wide range of instrumentation, OP amps, and buffer amp applications. With its classified features and features, you can get the best solution for your linear-amplifier needs.

The MCP6144T-I/ST is a three-terminal, 5-pin single op amp. This single op amp has an input supply voltage of 2.7V to 5.5V range and an output supply voltage of 2.7V to 5.5V. The datasheet indicates that it has a 1.3MHz maximum input bias current, 1,000V/microsecond maximum slew rate, and a 1.6mA minimum supply current, which makes it suitable for low-power instrumentation, OP amp, and buffer amp applications.

The MCP6144T-I/ST is a dual-channel configuration device, with a gain of 10. This means that multiple op amps can be stacked for higher gains. The output impedance of the device can reach values from 200 ohms to 1Kohm, and the output voltage can go up to 18V. The device also has a low quiescent current (Iq) of 0.25mA, which helps in reducing power supply noise, and improve the efficiency of the amplifier.

The MCP6144T-I/ST has two modes of operation, a high-impedance input and a low-impedance input. The high-impedance mode is suitable for higher frequency signals, while the low-impedance mode is suitable for signals with low frequencies. The device also has an ENABLE input, which enables the device to turn on and off during operation. This helps to conserve power during idle times.

The MCP6144T-I/ST is designed to have a high common-mode rejection ratio (CMRR), which allows it to reject common-mode interference from other devices. It also features rail-to-rail input voltage range, which allows it to accept both high- and low-level signals from various sources. The device also features low input bias current, low input offset current, and high input impedance logicPin, which facilitates low-noise operation in audio applications.

The MCP6144T-I/ST also features a small-signal bandwidth that can reach up to 5MHz. The small-signal bandwidth is the frequency range within which the device can accurately amplify small input signals. This feature makes it suitable for audio signaling applications, where higher fidelity signals are required.

The MCP6144T-I/ST\'s power performance features include Thermal shutdown protection and a wide input supply voltage range. Thermal shut down protection prevents the device from reaching an unsafe temperature, while the wide input supply voltage range ensures the device will not be damaged by overvoltage or undervoltage conditions. These features provide an extra level of reliability and durability for the device.

In summary, the MCP6144T-I/ST is a low-power, linear amplifier device that is suitable for a wide range of instrumentation, OP amp, and buffer amp applications. It has a variety of features that make it suitable for both high-frequency and low-frequency applications. Its amplifier performance features make it reliable, efficient, and safe to use. This makes the MCP6144T-I/ST an ideal choice for those who require an amplifier with high performance and low power consumption.

The specific data is subject to PDF, and the above content is for reference