MFP1WSBBE52-2K2

Series:	MFP
Packaging:	Bulk
Part Status:	Active
Resistance:	2.2 kOhms
Tolerance:	±0.1%
Power (Watts):	1W
Composition:	Metal Film
Features:	--
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.130" Dia x 0.354" L (3.30mm x 9.00mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors are special types of resistors that are most commonly used in electronic systems and devices. These resistors have a cylindrical shape, with two leads that go into holes drilled in the printed circuit board. This type of resistor is manufactured in a variety of materials including aluminum oxide, carbon, and paper-wax. The resistors come in various sizes and resistances, depending on the application.The MFP1WSBBE52-2K2 through hole resistor is a standard two-watt resistor and one of the most commonly used resistors in the electronics industry. This resistor is designed to withstand high-voltage spikes and heat. It is a three-pin resistor, with one lead connected to the resistor ground and the other connected to the resistor input. The resistance between the two pins is adjustable and can be set from zero ohms to two kilo-ohms by adjusting the dial on the resistor. This type of through hole resistor can be used in a wide range of applications, including filtering, voltage regulation, current limiting, and signal conditioning. In circuits where a constant current is required, such as in a voltage regulator, the MFP1WSBBE52-2K2 can be used to provide the necessary current. When used in a voltage regulator circuit, the MFP1WSBBE52-2K2 resistor sets the current level, and the voltage regulator will then sense this current and adjust its output accordingly.The MFP1WSBBE52-2K2 is also used in signal conditioning to reduce or increase the frequency of a signal. By using the MFP1WSBBE52-2K2, the signal can be passed through the resistor to reduce or increase the frequency, depending on the application. This makes it an ideal component when used in communication systems where a low-frequency signal needs to be transmitted or received.The working principle of the MFP1WSBBE52-2K2 is based on the use of Ohm’s Law. The resistance of the resistor is adjustable and will affect the current that passes through it. Ohm’s Law states that the current flowing through a resistor is equal to the voltage divided by the resistance of the resistor. Consequently, if the resistance of the MFP1WSBBE52-2K2 is increased, the current will decrease, and vice versa. In addition, the MFP1WSBBE52-2K2 is capable of withstanding high-voltage surges and heat. This is because the resistor is designed to dissipate the excessive heat and allow the circuit to remain safe and functional. As a result, the MFP1WSBBE52-2K2 is able to operate at high temperatures without any damage to the resistor or the circuit.In conclusion, the MFP1WSBBE52-2K2 through hole resistor is a versatile and reliable resistor that is used in a variety of applications. Its adjustable resistance and high-voltage surge protection makes it an ideal component for any electronic system or device. With its superior performance and robust design, the MFP1WSBBE52-2K2 through hole resistor is sure to be a great addition to any engineer’s toolkit.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description