MIMXRT1052CVL5B

Due to market price fluctuations,if you need to purchase or consult the price.You can contact us or emial to us:   sales@allicdata.com

1. Describe

i.MX RT1050 is a new family of processors featuring NXP's Arm Advanced Implementation Cortex®-M7 cores running up to 528 MHz provides high CPU performance and optimization Respond in real time. The i.MX RT1050 processor has 512 KB of on-chip RAM, Flexible configuration as TCM or General-purpose on-chip RAM. i.MX RT1050 Integrated Advanced Power Management Module DCDC and LDO with reduced external complexity power and simplify power sequencing. This i.MX RT1050 also provides various memory interfaces, Including SDRAM, RAW NAND FLASH, NOR FLASH, SD/eMMC, Quad SPI and various Additional interfaces for connecting peripherals, such as WLAN, Bluetooth™, GPS, displays and cameras sensor. i.MX RT1050 also has rich audio and video features, including LCD display, basic 2D graphics, Camera interface, SPDIF and I2S audio interface. This The i.MX RT1050 has analog interfaces such as ADC, ACMP and TSC.

2. Feature

    1. Supports a single Arm Cortex-M7 core with:

        - 32 KB L1 instruction cache

        - 32 KB L1 data cache

        - Full-featured floating point unit (FPU) supporting VFPv5 architecture

        - Supports Armv7-M Thumb instruction set

    2. Integrated MPU, up to 16 individual protective fields

    3. Up to 512 KB total of I-TCM and D-TCM

    4. 528 MHz frequency

    5. Cortex M7 CoreSight™ component integration for debugging

    6. Core frequency

        - Boot ROM (96 KB)

        - On-chip RAM (512 KB)

        - Configurable RAM size up to 512 KB shared with M7 TCM

    7. External memory interface:

        - 8/16-bit SDRAM, up to SDRAM-166

        - 8/16-bit SLC NAND FLASH, handles ECC in software

        - SD/eMMC

        - SPI NOR/NAND Flash

        - Parallel NOR FLASH with XIP support

        - Single/Dual Channel Quad SPI FLASH with XIP support

    8. Timer and PWM:

        - Two General Purpose Programmable Timers (GPT)

        - 4-channel general-purpose 32-bit resolution timer

        - each supports standard capture and compare operations

        - Four-cycle interrupt timer (PIT)

        - General purpose 16-bit resolution timer

        - Periodic interrupt generation

        - Four Quad Timers (QTimer)

        - General purpose 16-bit resolution timer per 4 channels

        - each supports standard capture and compare operations

        - Integrated quadrature decoder

        - Four FlexPWMs

        - Up to 8 individual PWM channels per channel

        - 16-bit resolution PWM for motor control applications

        - Four quadrature encoders/decoders

    9. UI

        - Parallel RGB LCD interface

        - Support 8/16/24 bit interface

        - Supports up to 1366 x 768 WXGA resolution

        - Supports indexed colors and 256 entry x 24 bit color LUTs

        - Smart LCD display with 8/16 bit MPU/8080 interface

  10. Acoustic:

        - S/PDIF input and output

        - Three Simultaneous Audio Interface (SAI) modules supporting I2S, AC97, TDM and Codec/DSP Interface

        - MQS interface provides medium quality audio via GPIO pads

  11. Universal 2D graphics engine:

        - bit bit

        - Flexible image compositing options - alpha, chroma key

        - image rotation

        - Porter-Daff Operations

        - size of the picture

        - color space conversion

        - Multi-pixel format support

        - Standard 2D-DMA operation

  12. Camera sensor:

        - Supports 24-bit, 16-bit and 8-bit CSI input

  13. Connectivity:

        - Two USB 2.0 OTG controllers with integrated PHY interface

        - Two Ultra Secure Digital Host Controller (uSDHC) interfaces

        - HS200 compliant MMC 4.5 supports up to 200 MB/sec

        - SD/SDIO 3.0 compliant with 200 MHz SDR signaling, supporting up to 100 MB/sec

        - Support SDXC (Extended Capacity)

        - A 10/100M Ethernet controller supporting IEEE1588

        - Eight Universal Asynchronous Receiver/Transmitter (UART) modules

        - Four I2C modules

        - Four SPI modules

        - Two FlexCAN modules

  14. GPIO and pin multiplexing:

        - General purpose input/output (GPIO) module with interrupt capability

        - Input/Output Multiplexer Controller (IOMUXC) provides centralized pad control

        - Two FlexIOs 

  15. The i.MX RT1050 processor integrates an advanced power management unit and controller:

        - Complete PMIC integration. On-chip DCDC and LDO

        - Temperature sensor with programmable trip point

        - GPC hardware power management controller

  16. The i.MX RT1050 processor supports the following system debugs:

        - Arm CoreSight debug and trace architecture

        - Trace Port Interface Unit (TPIU) to support off-chip real-time trace

        - Supports eFuse selectable 5-pin (JTAG) and SWD debug interfaces

  17. Security features are enabled and accelerated by the following hardware:

        1. High Assurance Boot (HAB) 

        2. Data Coprocessor (DCP):

            - AES-128, ECB and CBC modes

            - SHA-1 and SHA-256

            - CRC-32

  18. Bus Encryption Engine (BEE)

        - AES-128, ECB and CTR modes

        - Instant QSPI flash decryption

  19. True random number genes ration (TRNG)

  20. Secure Non-Volatile Storage (SNVS)

        - Secure real-time clock (RTC)

        - Zero Master Key (ZMK)

  21. Secure JTAG Controller (SJC)

3. Application

    1. Industrial Human Machine Interface (HMI)

    2. motor control

    3. Household equipment