Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power Relays, Over 2 Amps

MKS1XT-10 DC24 is a power relay that is used in industrial applications and is rated for over 2 Amps. It is used mainly for industrial environment protection, which include power line protection and appliance consumers protection. Power relays provide electrical isolation between power supply and appliance/motor or other loads, and are designed to be reliable and efficient.

Application Field

MKS1XT-10 DC24 is used in a variety of applications such as AC or DC motor control, energizing, switching, controlling the current and voltages, or controlling timer/pulse width modulation circuits. It can also be used in switching equipment, breaker control applications, smart relays, water/steam control, and home automation systems. The application of these power relays is also used in a variety of production and process system such as electric furnace, vehicle charging and discharging, battery discharge protection, soft start and process equipments.

Working Principle

The working principle of MKS1XT-10 DC24 is based on a coil of electromagnet that bridges the gap between two contacts. When the coil is energized or powered, an electromagnetic field is produced which produces a electromagnetism force that will act on the armature connected to the contacts. This force will cause the armature to pull the contacts together, producing a connection and completing the electrical circuit. The contacts remain in a connected state as long as the power to the coil is continues, allowing electricity to flow through the completed circuit. When the power is turned off, the electromagnetic field collapses and the armature is released, breaking the connection between the contacts and cutting the electrical circuit.

To make sure that the power relays are working correctly, it should be tested to ensure that it is actuating correctly and that the contacts are opening and closing properly. To do this, you will need an ohmmeter or low-voltage battery. Connect one lead of the ohmmeter or battery to one of the contacts and the second to the other. The ohmmeter will then measure the resistance between the two contacts and should initially be low indicating that the contacts are closed. When the power relay is activated with the appropriate voltage, the ohmmeter will measure a higher resistance indicating that the contacts have opened. The contacts should close again when the power relay is deactivated.

Conclusion

MKS1XT-10 DC24 power relay is used mainly for industrial environment protection, providing electrical isolation between the power line and appliance/motor, etc. It can be used in a variety of applications and production processes for different areas and is tested with an ohmmeter or low-voltage battery to ensure that the contacts are opened and closed properly.

The specific data is subject to PDF, and the above content is for reference