MOC3083S-TA1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MOC3083S-TA1 are optoisolators with triac, SCR output devices. They are opto-couplers which offer an efficient solution for many interface and protection requirements applicable in various types of applications. This device isolates the input from the output, making them ideal for applications at relatively high voltage.

The maximum voltage rating for the MOC3083S-TA1 is 600V, meaning that it is safe to use with up to 600 Volts of DC or AC voltage. It also has a minimum isolation voltage of 1000Vrms between the input-output. This makes it suitable for applications in which the interface between input-output needs to obtain high level of insulation. It also has an ON-state RMS current rating of 1A for relatively heavy loads.

The MOC3083S-TA1 includes two optically coupled random fire TRIAC device, in which the electrical isolation is achieved by placing a semiconductor die with 2 PAIR of high efficiency infrared Emitting Diodes optically coupled to a sensitive TRIAC detector located within the same package. The package configuration used is a 6-pin DIP package. The MOC3083S-TA1 can be triggered by a variety of light sources such as LEDs, tungsten lamps etc. that are supplied with DC voltages. The output current is controlled by the intensity of the light that is being applied to the input side of the optocoupler.

The main working principle of isocouplers is based on the light detecting principle in which the output of the detected optically-coupled TRIAC device is inversely proportional to the amount of light that is applied to the device\'s input. It uses current transfer ratio (CTR) to measure the relative strength of input ripple. CTR is determined by the ratio between the brightness of the input LED and the brightness of the output LED. The higher the CTR, the better response the device will have.

The MOC3083S-TA1 can be used for a wide range of applications, such as motor control, lighting control, and industrial process control. It is commonly used as an interface between input and output for controlling very large loads, as the isolation provided by the device ensures that the load is completely isolated from any changes in the input. The device is also used in applications where the interference needs to be reduced. This can be used in situations where there are electrical noise issues due to a large number of electrical components nearby.

In summary, the MOC3083S-TA1 are optoisolators with triac, SCR output devices. They offer an efficient solution for many interface and protection requirements applicable in various types of applications. The device is most commonly used in motor control, lighting control, and industrial process control and it is preferred due to its robust nature, high isolation voltage rating, and ability to handle relatively large loads.

The specific data is subject to PDF, and the above content is for reference