MT8816AP1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MT8816AP1 is a special purpose analog switch designed for use in several applications. This device operates by the working principle of an electromechanical switch, where two terminals are connected by a mechanical actuator. The analog switch is controlled by a digital input pin and can be used for signal switching and signal routing. In particular, this device is most suited for applications with a need for high signal integrity and/or high speed data paths.

The main application fields of the MT8816AP1 are audio and video signal processing, digital signal processing, communications systems, and embedded systems. In audio and video signal processing, the device is commonly used to route audio and video signals in receivers, amplifiers, digital-to-analog and analog-to-digital conversion products, and finite impulse response (FIR) filters. In digital signal processing, the device is used for data bus design and multiplexer circuits. In communications systems, the device is suited for clock and data recovery circuits and for video distribution systems. In embedded systems, the device is used for data routing in microcontrollers and gaming systems.

The MT8816AP1 can switch between several voltage levels, with a typical switching speed of 300ns. The typical on-state resistance (R_on) is low at 12Ω, ensuring a good signal path is provided. The device also features a few operational characteristics and parameters, such as input leakage current, ON voltage, and power dissipation. The device is also compliant with the JEDEC spec JC-81 and is rated for 0.5W of power dissipation at 25℃.

The working principle of the MT8816AP1 is relatively straightforward. When a digital logic level is applied to the control input of the device, the electromechanical switch will close and two of the terminals will be connected. When the control input voltage is removed, the switch will open and the two terminals will be disconnected. This device has to be driven by a low-voltage single-supply logic voltage in the range of 1.42V to 5.5V. It also features a high ESD protection of 2000V HBM.

In conclusion, the MT8816AP1 is a special purpose analog switch derived from the electromechanical switch principle. It is most suitable for applications needing high signal integrity and/or high speed data paths, including audio and video signal processing, digital signal processing, communications systems, and embedded systems. Its low on-state resistance and fast switching speed provide a reliable and consistent signal path. Additionally, this device is compliant with the JEDEC spec JC-81 and has a rated power dissipation of 0.5W at 25℃.

The specific data is subject to PDF, and the above content is for reference