NCX2202GW,125 Integrated Circuits (ICs)

Current - Input Bias (Max):	1pA
Base Part Number:	NCX2202
Supplier Device Package:	5-TSSOP
Mounting Type:	Surface Mount
Package / Case:	5-TSSOP, SC-70-5, SOT-353
Operating Temperature:	-40°C ~ 85°C
Hysteresis:	20mV
Propagation Delay (Max):	0.8µs
CMRR, PSRR (Typ):	70dB CMRR, 80dB PSRR
Current - Quiescent (Max):	6µA
Current - Output (Typ):	--
Series:	--
Voltage - Input Offset (Max):	30mV @ 5.5V
Voltage - Supply, Single/Dual (±):	1.3 V ~ 5.5 V
Output Type:	Rail-to-Rail
Number of Elements:	1
Type:	General Purpose
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Linear - Comparators

Linear - comparators are commonly used components in a wide range of applications. The NCX2202GW 125 is one such component that has a variety of uses in different circuitry. This article will discuss the general application field for the NCX2202GW 125 and its corresponding working principle. The NCX2202GW 125 is a comparator circuit that operates on a linear input and output. Comparators are more of an analog-type circuit that input a voltage level and output either a HIGH or LOW voltage state, depending on a test rate that is set. The NCX2202GW 125 has a range of input voltage of 2.5 volt to 6.0 volt and provides a maximum output voltage of 125 mV, with a supply voltage of 3.3 volts to 6.0 volts. It also has a fairly low power consumption of only 0.15 μA.This type of comparator is ideal for situations where the difference between two analog voltages needs to be compared. For instance, the NCX2202GW 125 is capable of detecting and comparing small changes in voltage between two pins, or “inputs”. This can be used in applications such as sensing and control of small electrical currents, such as indicator LEDs, and for voltage level shift circuits.The working principle for this type of comparator can be a bit complicated to understand. The comparator works based on the principle of a differential amplifier, which uses two amplifying transistors to amplify a signal. The input signal is amplified, and the output is then passed through an output transistor. The voltage level at which the output transistor switches HI or LO is determined by the voltage level of the reference voltage, which can be adjusted. For the NCX2202GW 125, this reference voltage can range from 2.5 to 6.0 volts. When the input voltage is higher than the reference voltage, then the output will switch to HI, while if the input is lower than the reference voltage, then the output will switch to LOW. The output voltage level is usually around 125 mV.In summary, the NCX2202GW 125 is ideal for applications that require the measurement of small voltages and the comparison of two signals. It has a wide range of input and output voltages, as well as a low power consumption. It operates on the principle of a differential amplifier, where the output voltage level is determined by the reference voltage. This type of comparator is widely used in many circuitry applications due to its simplicity and accuracy.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description