NEO-M8M-0 RF/IF and RFID |
|
| Allicdata Part #: | 672-1007-2-ND |
| Manufacturer Part#: |
NEO-M8M-0 |
| Price: | $ 7.15 |
| Product Category: | RF/IF and RFID |
| Manufacturer: | U-Blox America Inc. |
| Short Description: | IC RECEIVER GPS/GNSS 24LCCNEO-M8 RF Receiver BeiDo... |
| More Detail: | N/A |
| DataSheet: |  NEO-M8M-0 Datasheet/PDF |
| Quantity: | 500 |
| 250 +: | $ 6.50160 |
| 500 +: | $ 6.10473 |
| Series: | NEO-M8 |
| Packaging: | Tape & Reel (TR) |
| Part Status: | Active |
| Frequency: | 1.575GHz |
| Sensitivity: | -167dBm |
| Data Rate (Max): | -- |
| Modulation or Protocol: | BeiDou, Galileo, GLONASS, GNSS, GPS |
| Applications: | General Purpose |
| Current - Receiving: | 21mA |
| Data Interface: | I2C, SPI, UART, USB |
| Memory Size: | -- |
| Antenna Connector: | -- |
| Features: | -- |
| Voltage - Supply: | 1.65 V ~ 3.6 V |
| Operating Temperature: | -40°C ~ 85°C |
| Package / Case: | 24-SMD Module |
| Supplier Device Package: | -- |
| Base Part Number: | -- |
Due to market price fluctuations,if you need to purchase or consult the price.You can contact us or emial to us: sales@allicdata.com
1. Description
The NEO-M8M-0 series of concurrent GNSS modules are based on the industry-approved NEO form factor and high-performance u-blox M8 GNSS engine. The NEO-M8 module can receive up to three GNSS systems at the same time and recognize multiple constellations at the same time. In situations involving urban canyons or weak signals, it can provide excellent positioning accuracy. In order to improve positioning better and faster, the NEO M8 series supports the enhanced functions of QZSS, GAGAN and IMES as well as WAAS, EGNOS and MSAS. The NEO-M8 series also supports message integrity protection, geofencing and fraud detection through configurable interface settings to easily adapt to customer applications. NEO‑M8M is optimized for cost-sensitive applications, while NEO-M8N and NEO-M8Q provide the best solution performance. The future-oriented NEO-M8N and NEO M8J contain internal flash memory, which can be used for future firmware updates. This makes NEO-M8N and NEO-M8J very suitable for industrial and automotive applications. The I2C-compliant DDC interface provides connectivity and can be used with most u-blox cellular modules. In order to optimize the radio frequency, NEO-M8J, NEO-M8N and NEO-M8Q have an additional front-end LNA and a front-end SAW filter. The u-blox M8 module uses the GNSS chip AEC‑Q100 that meets the following standards and has passed ISO/TS 16949 certification. The chip is manufactured on-site and fully tested at the system level. The qualification test is carried out in accordance with the provisions of the ISO16750 standard: "Road vehicles-Environmental conditions and testing of electrical and electronic equipment". The u-blox NEO-M8 module can also benefit from u-blox AssistNow ancillary services. This online service provides GNNS broadcast parameters, such as ephemeris, almanac, and time or rough location to reduce the receiver's first major repair time and increase the sensitivity of collection.
2. Product features
3. Pin assignment
4. Mechanical specifications
Multi-band GNSS receiver with nanosecond...
High-performance LEA-6 series GPS module...
Simultaneous reception of GPS / QZSS, GL...
LEA-M8S module can receive up to 3 GNSS....
High-performance u-blox 6's LEA-6 se...
High-performance u-blox 5 LEA 5 series G...