P110KV1-1F25BR1K

Temperature Coefficient:	--
Mounting Type:	Panel Mount
Bushing Thread:	M9 x 0.75
Actuator Diameter:	0.236" (6.00mm)
Actuator Length:	0.984" (25.00mm)
Actuator Type:	Flatted
Termination Style:	PC Pins, Board Locks
Resistive Material:	Conductive Plastic
Adjustment Type:	Side Adjustment
Rotation:	300°
Number of Turns:	1
Series:	P110
Power (Watts):	0.05W, 1/20W
Built in Switch:	Detent
Number of Gangs:	1
Tolerance:	±20%
Resistance (Ohms):	1k
Taper:	Linear
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rotary Potentiometers, Rheostats

The P110KV1-1F25BR1K is a rotary potentiometer, rheostat, and resistor combination packaged in a single device. It is designed to enable easy and efficient control of voltage in various electronic applications, such as in electronic instruments or in solid-state circuitry.

Intermittent Characteristics

The P110KV1-1F25BR1K has a long-lasting, non-erodible intermittent life of 1 million operations. During these operations, the device will typically exhibit no more than a 1% resistance range change, ensuring reliable and repeatable performance.

Construction

The P110KV1-1F25BR1K comprises a thin-film resistor, a wiper, and a rotary slidewire. The wiper is made from a coated steel strip, which rotates in response to a knob or switch. The sliding contact is kept free from debris and dust using a corrosion-resistant O-ring seal. The P110KV1-1F25BR1K also features a low-profile design, allowing it to be used in tight spaces.

Application Field

The P110KV1-1F25BR1K is used in a variety of electronic applications where precise voltage control is required. It can be used to adjust the gain or cut-off frequency of a signal, and is designed to provide reliable performance for applications such as motor control, robotics, and generator control.

Working Principle

The P110KV1-1F25BR1K works by using the resistance of the thin-film resistor and the slidewire to control the voltage level of the device. As the wiper is rotated along the slidewire, the resistance of the thin-film resistor changes. This change in resistance creates a voltage drop, which can be used to control the level of voltage being applied to the device.The P110KV1-1F25BR1K is a versatile device that is well-suited for efficient voltage control in a variety of electronic applications. Its long intermittent life and low-profile design make it ideal for use in tight spaces, and its robust construction ensures reliable and repeatable performance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description