P2103AAL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A TVS (Transient Voltage Suppressor) is an electronic device used to protect electrical and electronic circuits and equipment against transient over-voltage. The TVS is a special type of Thyristor, specifically designed to provide electrical over-voltage protection. The NXP P2103AAL is a three-terminal thyristor designed for use in applications where transient voltage protection is desired and as a quick clamp in alternate applications.

The device is based on an advanced silicon controlled rectifier (SIC) technology and offers superior power handling capability, low dynamic clamping voltages, and fast turn-off time response. It also offers a wide operating voltage range of 40 V to 600 V. It is capable of handling up to 1000 watts of pulsed RF, RF surge transients, and ESD. It also provides a wide variety of protection thresholds to suit various application requirements while maintaining an extremely low level of loading. The device is also designed to provide low distortion and minimal load during normal operation.

The P2103AAL is a three-terminal, trigger-controlled thyristor device with a high-voltage rating of 600V. The three terminals are referred to as anode, cathode, and gate. The gate terminal is used to control and engage the device when a certain trigger voltage is applied. As a transient voltage suppressor, the device by-passes excessive voltage - clamping the voltage to a safe level thus protecting the circuit from possible damage due to an over-voltage condition. The trigger voltage of the device is typically >20V which can be exceeded with a suitable voltage signal when a valid surge must be bypassed.

In terms of device self-protection, the P2103AAL device provides a maximum current rating of 1000 watts along with various current limiters. It also features an over-temperature protection and a current-limiting circuit which protect the device from failing due to excessive current. The device is also designed to enter a low-leakage, low-impedance state when the voltage is greater than the device\'s rated voltage.

For its operation, the P2103AAL typically requires a bi-directional current source with a voltage above the device\'s trigger voltage which enables it to start switching the current. The current source is then fed into the device and its amplified via the anode-gat terminal junction, allowing it to switch from the conductive state to the non-conductive state. This allows the device to perform its task of suppressing voltage. The current can also be pre-biased to maintain the desired voltage path and to prevent it from exceeding the device\'s rated voltage.

Overall, the NXP P2103AAL is a three terminal thyristor device designed for applications which require a high-voltage rating, fast turn-off response, and over-temperature protection. Its advanced silicon controlled rectifier technology, along with its various current limiting features, make it an ideal choice for systems requiring robust over-voltage protection. The device has loads of features which enable it to effectively meet various application requirements while providing low distortion and minimal load during normal operation.

The specific data is subject to PDF, and the above content is for reference