P51-50-G-Z-P-4.5OVP-000-000

Series:	MediaSensor™
Part Status:	Active
Pressure Type:	Vented Gauge
Operating Pressure:	50 PSI (344.74 kPa)
Output Type:	Analog Voltage
Output:	0.5 V ~ 4.5 V
Accuracy:	±1%
Voltage - Supply:	5V
Port Size:	Male - 1/4" (6.35mm) NPT
Port Style:	Threaded
Features:	Amplified Output, Temperature Compensated
Termination Style:	Packard, 3 Pin
Maximum Pressure:	--
Operating Temperature:	-40°C ~ 105°C
Package / Case:	Cylinder
Supplier Device Package:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pressure Sensors, Transducers

P51-50-G-Z-P-4.5OVP-000-000 Pressure Sensors, Transducers are widely used and useful for several applications. These transducers are designed to provide accurate measurements of pressure by means of a pressure-measuring device, and offer superior accuracy and long-term stability within a wide range of industrial, laboratory and research settings.

P51-50-G-Z-P-4.5OVP-000-000 Pressure Sensors, Transducers possess a versatile design that is suitable for a large variety of applications. Typical applications of these transducers include: airflow and wind measurements; flow applications (such as air and water); water pressure monitoring; and pressure in a variety of liquids (such as fuel, oil, and chemical). Additionally, these transducers can also be used in a variety of industrial and research settings, such as vibration monitoring, temperature monitoring, and seismology.

The P51-50-G-Z-P-4.5OVP-000-000 Pressure Sensors, Transducers have two key components: a sensing element and a signal amplifier. The sensing element is typically composed of a thin-film, diaphragm-type pressure sensor, which is designed to measure a specified range of pressures. The signal amplifier is then used to detect and amplify any pressure changes that occur in the sensor. Both of these components are essential to ensure proper accuracy and long-term stability of the device.

The working principle of P51-50-G-Z-P-4.5OVP-000-000 Pressure Sensors, Transducers can be broken down into a few simple steps. Firstly, the sensing element will measure the pressure and convert it into an electrical signal. Secondly, the signal amplifier will detect and amplify any pressure changes that occur in the sensor and further refine the signal. Finally, the refined signal is sent to the output of the pressure sensor, where it can be read as desired.

The accuracy of P51-50-G-Z-P-4.5OVP-000-000 Pressure Sensors, Transducers is determined by two factors: the accuracy of the sensing element and the accuracy of the signal amplifier. To ensure the most accurate measurement possible, both of these components should be designed with precision. In addition, the signal amplifier should be calibrated to the sensor\'s output range before each use.

In order to maintain the long-term accuracy and stability of P51-50-G-Z-P-4.5OVP-000-000 Pressure Sensors, Transducers, it is important to follow certain maintenance procedures. Firstly, any debris or obstructions should be removed from the diaphragm of the sensor in order to keep it operating within its designed range. Additionally, the signal amplifier should be checked periodically, and the sensor should be re-calibrated or replaced if necessary. Additionally, any environmental changes, such as temperature or humidity, should be accounted for in the calibration.

The P51-50-G-Z-P-4.5OVP-000-000 Pressure Sensors, Transducers offer accurate and long-term stable measurements in a wide variety of industrial and research applications. Furthermore, the two-component design provides superior accuracy and stability, while simple maintenance procedures help to ensure that the device will continue to work up to its rated specifications over time. Finally, these transducers are versatile, and can be used in numerous settings, including air and water flow applications, pressure readings in liquids, and temperature and vibration monitoring.

The specific data is subject to PDF, and the above content is for reference