P6002ACMC Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A Transient Voltage Suppressor (TVS) is a Thyristor-based energy-management device that is specifically designed to defend against high amounts of voltage and current and protect the circuits from transient over-voltages and transient over-currents. The P6002ACMC is a triple-point-grounded Transient Voltage Suppressor (TVS) array that is designed to provide Dual Differential Protection against transient over-voltages and transient over-currents. It operates from -3V to +40V with a low clamping voltage of up to 40V.

The P6002ACMC Transient Voltage Suppressor is a triple-point-grounded assembly of three diodes connected in a reverse-parallel configuration. The diodes are connected so that a semiconductor switch is formed when the voltage across any two of the diodes reaches the forward-breakover point. When an over-voltage occurs, the switch is triggered, allowing the transient voltage to be reduced to a safe level.

When the transient voltage is reduced to a safe level, the P6002ACMC then acts as an active current limiter, limiting the current flowing through the device. The resulting current limit will depend on the clamping voltage of the P6002ACMC and the current capability of the load circuit.

The P6002ACMC is also designed to provide ESD protection, meaning that it can defend against Fast Transient Over-Voltages (FTOVs). FTOVs are short, high-amplitude over-voltages, which are often caused by Electrostatic Discharge (ESD). The P6002ACMC is designed to clamp the voltage to a safe level before the ESD current is able to damage the circuitry.

The P6002ACMC is an ideal device for different applications, including data and communication equipment, consumer electronics and automotive applications. In automotive applications, it is used to protect switches and connectors from high transient voltages, which are common in automotive environments. It can also help to reduce any disruption caused by micro-arc erosion and arcing.

In summary, the P6002ACMC is a Thyristor-based device that is designed to provide Dual Differential Protection against transient over-voltages and transient over-currents. It operates from -3V to +40V with a low clamping voltage of up to 40V, can provide ESD protection, and is suitable for a variety of different applications, including automotive applications.

The specific data is subject to PDF, and the above content is for reference