PC852XNYSZ0F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are a special type of device used to provide electrical isolation between an input and an output circuit, typically allowing for the transmission of a signal between components without any direct contact with the power source. This allows for the efficient transmission of signals without the electrical noise or interference commonly associated with electrical coupling. One type of optoisolator is a transistor, photovoltaic output type. A PC852XNYSZ0F is an example of this type, and it is used in a variety of applications.

The PC852XNYSZ0F is a three-terminal optoisolator that provides electrical isolation of up to 2500V RMS between its input and output terminals. It is intended for applications needing an isolated supply, and it features a high-efficiency infrared LED that is internally connected to the input terminal. The output side of the optoisolator consists of a photovoltaic switch, which provides either an open-collector output or an open-emitter output depending on the model. This optoisolator works on a principle called Saturable Reactor, where the input current is modulated by the LED and this modulated current in turn causes the output device to switch on or off.

The PC852XNYSZ0F optoisolator is used in a wide variety of applications. Commonly it is used in medical and laboratory instrumentation for insulation of sensitive instrument circuits from the electrical noise that comes from power sources, such as wall sockets or the batteries used in portable equipment. Additionally, the optoisolator is also used in industrial automation to electrically isolate two or more sections of a line or machine. This device can also be used to help reduce EMI/RFI interference.

The PC852XNYSZ0F provides isolation protection for two or more circuits, allowing for signal transfer without direct contact with the power source. This is achieved through its internal components, which are an LED and a photovoltaic switch. The LED especially is the key component in allowing the transmission of a signal between components without direct contact with the power source. When the LED is activated, it generates a modulated current, which is then used to switch on the photovoltaic switch. The switch then either opens or closes the circuit, depending on the model, thus providing electrical isolation of up to 2500V RMS between its input and output terminals.

The specific data is subject to PDF, and the above content is for reference