PIC16LC622-04E/P

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The PIC16LC622-04E/P microcontroller is a mid-range device of the PIC16 Series developed by Microchip Corporation. It is a small, low-power, low-cost 8-bit microcontrollers employing RISC (Reduced Instruction Set Computing) architecture and runs at 8 MIPS (5.5 MHz internal oscillator). It is available in an 18-Pin DIP (Dual In-line Package) and a 20-Pin PDIP (Plastic Dual In-line Package).

The PIC16LC622-04E/P microcontroller is ideal for applications requiring multiplexed data input/outputs and output latch with high driving capability, configurable as digital I/Os or peripherals with integrated address decoding. It can be used in power control applications with built-in pulse-width modulation (PWM), buffered Op-Amp and analog comparator, and SPI (Serial Peripheral Interface) master and slave operations. It is capable of low-power operation with low standby current and has Power-Down Mode.

The PIC16LC622-04E/P microcontroller comes with 8K words of Flash Program Memory, a 256-byte internal data EEPROM Memory, 384 bytes of RAM, 256 bytes of Non-Volatile Data Memory, 6 I/O pins, 2 Timer/Counters, and a Capture/Compare/PW M module. The integrated interrupt controller supports up to five independent interrupts as well as various interrupt sources. The microcontroller is supported by ICD-U40 In-Circuit Debugger with serial connection.

The PIC16LC622-04E/P microcontroller is designed to work with a wide range of operating voltages ranging from 3V-6V and is suitable for applications requiring low power budget such as remote monitoring and controlling, computer peripherals, light automation, and security systems. Some of the typical applications for the PIC16LC622-04E/P microcontroller are digital sensors, display drivers, motor control & sensing, digital audio, home color control, digital clock & calendar, stepper motor control, and programmable logic arrays.

Working Principle

The PIC16LC622-04E/P microcontroller is based on a reduced instruction set computer (RISC) architecture, where each instruction executes in one or two machine cycles. The instruction set includes instructions for moving data within the register file, arithmetic and logic operations, and program control flow. The instruction set can be divided into two parts, an arithmetic and logic unit (ALU) and the control section. The ALU is responsible for performing all arithmetic, logic, and bitwise operations, while the control section handles instructions related to program control such as looping instructions, conditional jumps, and subroutine calls.

The PIC16LC622-04E/P microcontroller also includes built-in modules such as a terminal count/PWM module, serial communications ports, analog-to-digital converters, and a watchdog timer. These modules are used to interface with external peripherals and can be used for simple or complex tasks such as digital and analog measurement, communication, and data acquisition. All of the modules have programmable timer registers and can be independently controlled from the MCU. The timer modules also provide accurate pulse width modulated (PWM) output.

The programming of the PIC16LC622-04E/P microcontroller is done with an assembler/compiler program, which is usually supplied with the product. The compiler compiles the code written into a set of machine language instructions that are then transferred to the microcontroller through a special programming cable. The programming interface is universal, allowing compatible programs to be used with any microcontroller.

The PIC16LC622-04E/P microcontroller is also supported by a comprehensive development environment consisting of a wide range of integrated software and hardware tools. These include in-circuit debuggers, hardware simulators, project managers, and application libraries. All of these tools help the developers in creating and debugging code, as well as optimizing the design for power consumption and cost.

The specific data is subject to PDF, and the above content is for reference