QTH-040-01-F-D-DP-A-RT1-TR

Series:	Q Strip® QTH
Packaging:	Tape & Reel (TR)
Part Status:	Active
Connector Type:	Differential Pair Array, Male
Number of Positions:	80
Pitch:	0.020" (0.50mm)
Number of Rows:	2
Mounting Type:	Surface Mount
Features:	Board Guide, Ground Bus (Plane), Mounting Flange
Contact Finish:	Gold
Contact Finish Thickness:	3.00µin (0.076µm)
Mated Stacking Heights:	5mm
Height Above Board:	0.160" (4.06mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

QTH-040-01-F-D-DP-A-RT1-TR is a type of rectangular connector which falls under the category of Arrays, Edge Type, Mezzanine (Board to Board). This connector is widely used in a variety of applications due to its compact size, ability to mate two boards without the need for a cable, high reliability and its ability to transfer power and data. This article will discuss the application field and working principle of the QTH-040-01-F-D-DP-A-RT1-TR rectangular connector.

Application Field

The QTH-040-01-F-D-DP-A-RT1-TR is suitable for use in applications where high-speed data transfer is required and where high mating cycles are necessary. These types of connectors are often used in medical equipment, aerospace applications, and industrial machinery that require frequent reconfiguration or maintenance. This type of connector is also used in the automotive industry. Due to its small size, it is often used in applications such as door trim, dashboard, and interior/exterior lighting/electrical systems, as well as in internal HVAC and engine control systems. In addition, the QTH-040-01-F-D-DP-A-RT1-TR is also suitable for applications where high vibration is a concern. This type of connector has a built-in locking mechanism which ensures enhanced durability and reliability even under high vibration conditions.

Working Principle

The QTH-040-01-F-D-DP-A-RT1-TR is composed of two components, a receptacle and a plug. The receptacle is mounted on the end of one board and has two rows of pins. These pins are connected to a single row of contacts on the bottom side of the board. The plug is then inserted into the receptacle and the pins on the bottom side of the board come into contact with the contacts on the plug. When the plug is inserted, it pushes a lever which causes a spring-loaded mechanism to engage. This mechanism locks the plug into the receptacle and ensures that it does not become detached due to vibration or other physical impacts. The QTH-040-01-F-D-DP-A-RT1-TR connector is designed to transfer both power and data signals. The pins are soldered to PCB traces that are connected to the power and data lines. The signals are transferred by the contacts in the receptacle and the plug.

Conclusion

The QTH-040-01-F-D-DP-A-RT1-TR is a type of rectangular connector which falls under the category of Arrays, Edge Type, Mezzanine (Board to Board). It is used in a variety of applications due to its compact size, ability to mate two boards without the need for a cable, high reliability and its ability to transfer power and data. The QTH-040-01-F-D-DP-A-RT1-TR is suitable for use in high-speed and high-vibration applications, as well as for automotive applications. Its working principle consists of a receptacle and plug, a spring-loaded locking mechanism, and the transfer of power and data signals.

The specific data is subject to PDF, and the above content is for reference