RC12KB5M60

Series:	RC
Packaging:	Bulk
Part Status:	Active
Resistance:	5.6 MOhms
Tolerance:	±10%
Power (Watts):	0.5W, 1/2W
Composition:	Carbon Composition
Features:	Non-Inductive, Pulse Withstanding
Temperature Coefficient:	--
Operating Temperature:	-55°C ~ 125°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.142" Dia x 0.374" L (3.60mm x 9.50mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors – RC12KB5M60 application field and working principle

Through hole resistors are electronic components that offer resistance to electrical current. This type of resistor is designed to be mounted permanently on a circuit board or PCB (Printed Circuit Board). Generally, they are made of non-conductive ceramic or plastic with an embedded metal sheet. The metal sheet will have a hole in it that is designed to thread onto a metal stud or pin on the circuit board.The RC12KB5M60 resistor is a through-hole type resistors with a flat top and a tapped hole design. It is ideal for applications with limited space requirements or when more than one resistors are needed in a circuit. The RC12KB5M60 resistor provides excellent performance in high-frequency applications due to its low ESR (Equivalent Series Resistance).The most common application fields for this type of resistor are high-precision analogue systems, filters, and oscillators, such as radio receivers and transmitters. It is especially designed for low-impedance circuits, which require a high voltage rating and excellent power dissipation. Due to its good stability with respect to temperature, the RC12KB5M60 resistor is also suitable for measurement and control systems.The working principle of the RC12KB5M60 resistor is based on the two fundamental laws of electricity: ohm’s law and joule’s law. Ohm’s law states that the current flowing through a conductor is proportional to the voltage applied to it, while joule’s law states that the power dissipated is proportional to the square of the voltage.In the RC12KB5M60 resistor, the resistive element is made of nichrome wire which produces a resistor with excellent electrical characteristics. The nichrome wire is usually spiral shaped in order to maximise the surface area contact with the dielectric material. This allows for a higher power dissipation value in the resistor and reduces the heating effect of the resistor.The working principle of the resistor can be further explained with the use of a schematic diagram. The RC12KB5M60 resistor is connected between two electric lines. The incoming current passes through the resistor which causes resistance, thus limiting the current. The current limiting is proportional to the value of the resistance. The voltage across the resistor is equal to the applied voltage and is often displayed on the digital multimeter (DMM). This allows for accurate measurements of current and voltage to be taken.The RC12KB5M60 resistor is an ideal choice for high current and voltage applications due to its high power dissipation and good performance at high frequencies. As a through-hole type resistor, it is also easy to solder and mount on the circuit board, allowing for quick and easy installation. This type of resistor is suitable for a variety of applications ranging from high-precision analogue systems to radio equipment and measurement systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description