RCD-24-1.00/PL/A-R Power Supplies - Board Mount

Dimming:	Analog, PWM
Weight:	0.004 lb (1.81g)
Approvals:	EN
Packaging:	Tape & Reel (TR)
Size / Dimension:	1.22" L x 0.45" W x 0.26" H (31.0mm x 11.4mm x 6.6mm)
Package / Case:	6-SMD
Mounting Type:	Surface Mount
Efficiency:	96%
Operating Temperature:	-40°C ~ 65°C
Features:	Remote On/Off, OTP, SCP
Series:	LIGHTLINE RCD-24-PL
Power (Watts):	32W
Current - Output (Max):	1A
Voltage - Output:	2 ~ 32 V
Voltage - Input (Max):	36V
Voltage - Input (Min):	6V
Number of Outputs:	1
Topology:	Buck
Type:	Constant Current
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

LED Drivers are the components that power LEDs. They are used to convert a DC input voltage into a typically higher voltage AC output voltage to power LEDs. The RCD-24-1.00/PL/A-R is one of the more popular LED Drivers due to its low cost and ease of integration. This article will discuss the application field and working principle of the RCD-24-1.00/PL/A-R LED Driver.

Application Field

The RCD-24-1.00/PL/A-R LED Driver is designed for applications that require a low cost and efficient power source for their LED lighting applications. The RCD-24-1.00/PL/A-R LED Driver is perfect for applications in street lights, parking lots, billboard lighting, signs, architectural lighting, and other applications where a high efficiency and reliable light source is required.

Working Principle

The RCD-24-1.00/PL/A-R LED Driver is designed to convert a DC input voltage of 24V into a typically higher voltage AC output voltage of 100V. This is done by using two integrated bridge rectifiers, two voltage regulator ICs, and two phase-shift transformers. The rectifiers convert the DC input voltage into a high voltage AC signal. The two voltage regulator ICs then step down the AC signal to produce a constant, reliable output voltage. Finally, the phase-shift transformers are used to convert the AC signal into an AC voltage that is suitable for powering LEDs. The RCD-24-1.00/PL/A-R LED Driver also features a built-in protection circuit that protects the device from overloads and short circuits. The protection circuit has two functions. The first function is the over-load protection, which will shut off the output voltage if the input voltage is too high, or if the output current exceeds a certain limit. The second function is the short-circuit protection, which will shut off the output voltage if there is a short-circuit between the input and output terminals.

Conclusion

The RCD-24-1.00/PL/A-R LED Driver is an affordable and reliable LED Drivers that has many uses and applications in the field of LED lighting. The device is designed to convert a 24V DC input voltage into a typically higher voltage AC output voltage of 100V in order to power LEDs. The RCD-24-1.00/PL/A-R LED Driver also features a built-in protection circuit that protects the device from overloads and short circuits. The device is perfect for applications in street lights, parking lots, billboard lighting, signs, architectural lighting, and other applications where a high efficiency and reliable light source is required.

The specific data is subject to PDF, and the above content is for reference