RN60C4223BB14

Series:	Military, MIL-R-10509/1, RN60
Packaging:	Bulk
Part Status:	Active
Resistance:	422 kOhms
Tolerance:	±0.1%
Power (Watts):	0.25W, 1/4W
Composition:	Metal Film
Features:	Flame Retardant Coating, Military, Moisture Resistant, Safety
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.145" Dia x 0.344" L (3.68mm x 8.74mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors are a common, efficient, and reliable electronic component. They come in a variety of shapes and sizes and are designed to allow through-hole mounting into printed circuit boards. The RN60C4223BB14 is a through hole resistor specifically designed for low-voltage, low-power applications. In this article, we will discuss the application field and working principle of the RN60C4223BB14.The RN60C4223BB14 is a surface mount, thick film resistor. This also means that it can be used in a variety of surface mount printed circuit boards, in which through hole resistors are often difficult to fit. In addition, the thick film construction of the RN60C4223BB14 makes it especially suitable for low-voltage and low-power applications. It is a very cost-effective solution, thanks to its small size and low manufacturing costs.The RN60C4223BB14 has a resistance range of 0.25 ohms to 9.1 ohms, and a tolerance of 1%. It is available with either one or two pin terminal varieties, depending on the application. The resistance range and tolerance makes the RN60C4223BB14 suitable for a variety of applications, such as MCUs, amplifiers, and motors, and it is ideal for industries ranging from consumer electronics to automotive.When it comes to working principle, the RN60C4223BB14 uses a thick film construction to create resistors with high accuracy and reliability. The resistor is formed by depositing a thin film of resistive material on a substrate, such as an epoxy substrate or a nickel-plated copper substrate. This substrate is then heated to form the resistive trace. Once the film is cooled, the resistor is fully formed.The RN60C4223BB14 is an excellent choice for applications in which low-power and low-voltage are needed. It is a reliable, cost-effective component and thanks to its small size, it is ideal for densely packed circuit boards. The resistor is especially suited for low-voltage applications, and its resistance range and tolerance make it suitable for a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description