SE10PDHM3/85A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SE10PDHM3/85A is a rectifier diode that has the capability of rectifying single-phase AC power efficiently. Through this rectifying process, single-phase AC power is converted into DC power for various applications. This diode is particularly well suited for a wide range of applications due to its low forward voltage drop, small size, and low cost.

The SE10PDHM3/85A is a high-speed, high-efficiency rectifier diode rated at 8.5A, 600V, with a forward voltage drop of 1.8V @ 8.5A. It is available in a full-molded plastic case and has a limitation on the maximum thermal resistance junction to case meaning it can operate safely in higher-power applications. This diode also boasts a high peak reverse voltage of 275V and a high surge current rating of 200A, giving it the ability to rectify currents for various applications.

The SE10PDHM3/85A is primarily used for rectifying single-phase AC power when it is necessary to convert it into DC power. The diode works to achieve this conversion by first allowing the positive half-cycle of the AC current to pass through it and become the positive half of the DC current, while simultaneously blocking the negative half-cycle. This process can then be repeated for the negative half-cycle, allowing it to become the positive half of the DC current while blocking the positive half-cycle. This type of rectification is also referred to as full-wave rectification.

The SE10PDHM3/85A is commonly used in consumer electronics applications such as power supplies and voltage regulators. It is also used in a variety of industrial applications, such as the motor drives found in some industrial equipment. The diode is able to efficiently rectify AC power into DC power, which can then be used to power these types of applications.

The SE10PDHM3/85A is a high-speed, high-efficiency rectifier diode that can handle large amounts of power with relative ease. Its small size and low cost make it suitable for a wide range of applications and its forward voltage drop of 1.8V means it consumes less power for increased efficiency. With its ability to rectify single-phase AC power, it is ideal for any application where AC power needs to be converted into DC power.

The specific data is subject to PDF, and the above content is for reference