SE4120S-R RF/IF and RFID |
|
| Allicdata Part #: | 863-1353-2-ND |
| Manufacturer Part#: |
SE4120S-R |
| Price: | $ 0.00 |
| Product Category: | RF/IF and RFID |
| Manufacturer: | Skyworks Solutions Inc. |
| Short Description: | IC RCVR GPS/GALILEO 46WLCSP |
| More Detail: | SiGe RF Receiver Galileo, GPS 1575.42MHz PCB, Su... |
| DataSheet: |  SE4120S-R Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Receiving: | 10mA |
| Supplier Device Package: | 46-WLCSP (2.20x2.18) |
| Package / Case: | 46-XFBGA, WLCSP |
| Operating Temperature: | -40°C ~ 85°C |
| Voltage - Supply: | 2.7 V ~ 3.6 V |
| Features: | -- |
| Antenna Connector: | PCB, Surface Mount |
| Memory Size: | -- |
| Data Interface: | PCB, Surface Mount |
| Series: | SiGe |
| Applications: | GPS Receiver |
| Modulation or Protocol: | Galileo, GPS |
| Data Rate (Max): | -- |
| Sensitivity: | -- |
| Frequency: | 1575.42MHz |
| Part Status: | Obsolete |
| Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
SE4120S-R is a type of RF receiver, which dominates its large application field among the different users. Its outstanding performance has also been recognized by designers and engineers all over the world.
The SE4120S-R is a bipolar low noise amplifier with a wide bandwidth and low input impedance. It can be used as a front-end amplifier for RF receivers, such as satellite receiver and Digital receivers, in order to increase the sensitivity and signal levels. In addition, it can also be used for RF transmission applications, such as telemetry, military communication, mobile communication and so on.
In RF receiver applications, the SE4120S-R amplifier can be used to amplify the signal from a selected frequency. The noise figure of the amplifier is less than 1.5 dB. The input impedance of the amplifier is 50 ohms, which makes it compatible with most receivers. In addition, the gain of the amplifier can be adjusted from 0 dB to 15 dB. This makes the SE4120S-R a versatile and powerful amplifier.
The SE4120S-R has a wide dynamic range, so it can be used in a variety of applications that require a wide range of input signal levels. The amplifier is designed to have low distortion levels, so it can be used in CDMA applications. It also works well in multi-carrier applications, such as digital audio broadcasting and digital video broadcasting.
The working principle of the SE4120S-R RF receiver is the same as that of other amplifiers. It amplifies an input signal and outputs an amplified signal. The input signal is first amplified by the amplifier and then further amplified by an output stage. The gain of the amplifier is controlled by an external control voltage. This control voltage is used to set the gain and the bandwidth of the amplifier.
In conclusion, the SE4120S-R amplifier has a large application field among different users. It is a highly reliable and efficient amplifier that can be used in a wide range of applications, including mobile communication, military communication, satellite receivers and digital receivers. The amplifier has a low noise figure and a wide dynamic range, so it provides excellent performance. The control voltage is used to set the gain and bandwidth of the amplifier, which makes it a customizable and versatile amplifier.
The specific data is subject to PDF, and the above content is for reference
| Part Number | Manufacturer | Price | Quantity | Description |
|---|
Multi-band GNSS receiver with nanosecond...
High-performance LEA-6 series GPS module...
Simultaneous reception of GPS / QZSS, GL...
LEA-M8S module can receive up to 3 GNSS....
High-performance u-blox 6's LEA-6 se...
High-performance u-blox 5 LEA 5 series G...