SG-310SCF 35.46895MM

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are used to produce periodic electronic signals, forming the basis of much circuitry, electronics projects and components. One type of oscillator is the SG-310SCF 35.46895MM, which is capable of producing high-performance, high-frequency signals in HF (3.5MHz) and VHF (345MHz) frequency bands.

The SG-310SCF 35.46895MM is primarily used in communication applications, such as radio, television, cellular and satellite communication systems. It is also used in other applications such as automotive, medical and navigation systems. The device is based on a Pierce oscillator design and is capable of producing square, sine, triangle and sawtooth waveforms.

The SG-310SCF 35.46895MM is designed to be highly efficient, using only 1.8V power supply voltage and consuming low power. This makes it ideal for battery-powered applications such as remote Control, Radio Telemetry, Air Traffic Control and Remote Sensing.

The working principle of the SG-310SCF 35.46895MM oscillator is based on a circuit composed of two transistors. The transistors are connected in such a way that the electrical current is alternately amplified and suppressed in the circuit, resulting in a series of alternating currents. This alternating current is converted to a continuous analog signal by a differential amplifier, producing the desired frequency of the signal. The output of the oscillator is fed through a low-pass filter, which filters out any harmonic distortion and reduces spurious frequencies. The SG-310SCF 35.46895MM can be used in both heterodyne and direct-conversion applications. For heterodyne, the oscillator generates a signal at a frequency shifted from the desired frequency, and this frequency is then shifted to the desired frequency in the receiver. In direct conversion, the oscillator is used to produce the exact frequency desired. The two modes can be switched between automatically through the application of a signal to the oscillator\'s external control port.

The SG-310SCF 35.46895MM can be used for a wide range of applications, from providing RF signals for TV, radio or navigation systems, to providing microwave signals for communication, radar and satellite applications. It is an excellent choice for many applications due to its high-performance, energy-efficient design and wide frequency range.

The specific data is subject to PDF, and the above content is for reference