SI5367A-B-GQ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SI5367A-B-GQ is a highly versatile clock generator and synthesizer module with comprehensive features that allow it to be widely applied in mainstream telecommunications, systems architecture, and network interfaces. This clock generator and synthesizer module is designed for use in the telecom, datacom, and wireless industries. It has been used in numerous products and services from heterogeneous networks to digital communication.

As a clock generator and synthesizer module, the SI5367A-B-GQ provides a wide range of clock signals and its applications are varied and versatile. The device can be used to generate clock signals for systems requiring high frequency clocks and for systems requiring low noise clock frequencies. It has been used for clock and data distribution, clock and data buffering, clock and data regeneration, Clock and Communications System time synchronization, and Clock Data Recovery. The ability to generate multiple clock signals makes the SI5367A-B-GQ suitable for distributed systems, as well as multi-core and multi-processor systems.

The SI5367A-B-GQ has a flexible architecture and circuitry, which allows it to be used as a clock generator alone, or in combination with phase-locked loop (PLL) hardware, or even with frequency synthesizers. The circuitry of the device provides both phase and frequency control, allowing the device to be used as a phase-locked loop or as a frequency synthesizer. It has adjustable frequency and phase parameters to provide the desired clock output levels and speeds. Additionally, it has a wide range of output frequencies, which allows for the generation of multiple clock signals for data transmission and buffering.

The SI5367A-B-GQ can be configured for output frequencies ranging from 32 kHz to 110 MHz, operating voltages from 1.8V to 5.0V, and can be operated from either a single supply or multiple supplies. The device also provides adjustable duty cycle and a power-down/standby mode. The device also includes an output enable pin, allowing the output to be controlled and configured as needed.

The working principle of SI5367A-B-GQ is fairly simple. The device has two major components that work in conjunction with each other. First, there is the internal oscillator, which provides the reference clock signal to the device. The oscillator is controlled by the device\'s parameters, such as frequency and duty cycle. Second, the device has a phase-locked loop (PLL) that uses the clock signal generated by the oscillator as a reference, and locks itself to the same frequency as the oscillator.

Once the PLL is locked, the output of the device follows the same frequency as the internal oscillator. This output is then fed through a divide-by-N counter to divide it down to the desired frequency and duty cycle. The SI5367A-B-GQ also provides a power-down/standby mode and output disable pin, allowing the device to be configured as needed.

The SI5367A-B-GQ clock generator and synthesizer module has been designed for use in the telecom, datacom, and wireless industries. It is a highly versatile device that provides the necessary features and flexibility required for the generation of multiple clock signals. With its adjustable frequency and phase parameters, the SI5367A-B-GQ can be used as either a clock generator alone, or in combination with phase-locked loop hardware, or even with frequency synthesizers. In addition, the device can be used to generate clock signals for systems requiring high frequency clocks, low noise clocks, as well as clock and data distribution, clock and data buffering, and clock and data regeneration. The ability to generate multiple clock signals makes the SI5367A-B-GQ suitable for distributed systems, as well as multi-core and multi-processor systems.

The specific data is subject to PDF, and the above content is for reference