SIT9005ACT1G-28NA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable oscillators are a type of electronic components widely used in the electronic world to generate electrical signals. The SIT9005ACT1G-28NA is a programmable oscillator that can be used for a wide range of applications. This article will discuss the application fields and working principles of the SIT9005ACT1G-28NA.

Application Field

The SIT9005ACT1G-28NA can be applied to various applications like clock generation, signal generation, data acquisition, and communication networks. In clock generation, the oscillator is used to synchronize different parts of the circuit. Since the oscillator is an oscillating circuit, it can produce a steady, repetitive signal with typically low jitter and good noise immunity. The oscillator can also be used for signal generation, such as to generate digital signals for data acquisition, control registers in communication networks, and timing signals in digital circuits.

Working Principle

The working principle of the SIT9005ACT1G-28NA is based on the generation of a continuous electrical signal. This is accomplished by a combination of amplifier, feedback and resonator. The voltage-controlled oscillator (VCO) at the center of the circuit is used to produce the output signal. The oscillator has a frequency range of 20-80 MHz with a maximum frequency deviation of 10%. The signal is then amplified by the amplifier and fed to the resonator. The resonator is used to provide feedback by converting the signal into a cyclic signal. The output signal is then filtered using a charge-pump low-pass filter, and the frequency is controlled using a voltage-control input.

Conclusion

The SIT9005ACT1G-28NA programmable oscillator is a versatile electronic component that can be used for a variety of applications. Its working principle is based on the generation of a continuous output signal using a combination of amplifier, feedback and resonator. The frequency of the output signal is controlled by a voltage-control input. This makes the device ideal for clock generation, signal generation, data acquisition, and communication networks.

The specific data is subject to PDF, and the above content is for reference