SML-A12DTT86J Optoelectronics

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SML-A12DTT86J is a discrete LED indication device made by Opto-22. It is an AC/DC light-emitting diode that has an on/off state. It is used to perform visual status marking of a circuit or system, such as power-on/off, alarm, and failure detection. The SML-A12DTT86J uses a long-life, high-brightness infra-red (IR) emitting diode to provide good visibility, even in dark environments.

The SML-A12DTT86J can be used to install discrete LED indication lights in a variety of industrial applications which require visibility under poor lighting conditions. The device has a wide operating temperature range, from -40°C to +85°C, making it ideal for many environments. It also has a high level of resistance to shock and vibration, allowing it to work in harsh industrial environments.

The SML-A12DTT86J consists of an LED die, lens, mounting bracket, and supporting components. It has two connection ports, one an AC/DC input and the other a positive (+) output. The AC/DC input is where the power supply is connected, while the positive (+) output is where the LED output is connected to the system or circuit. The voltage of the AC/DC input must be compatible with the operating voltage range of the SML-A12DTT86J, usually between 6 and 24 volts dc. However, its operating voltage range is wide enough to accommodate most AC/DC switching power supplies.

The SML-A12DTT86J requires an appropriate connected load, such as a resistor or transformer, to operate. The load must be rated to allow the appropriate current to pass through it, and it must also be able to dissipate the heat produced by the LED die. To ensure proper operation and prevent possible damage, the load should be matched to the SML-A12DTT86J’s maximum current and voltage ratings. For example, if the SML-A12DTT86J has a maximum current rating of 1.5 Amps, then the connected load must be rated for 1.5 Amps or higher.

The LED die of the SML-A12DTT86J is designed to be ultra-low power, and can operate on as little as 5 mA. It has a built-in latch circuitry that enables it to switch on when a high signal is present, and stay on until a low signal is present, or for few milliseconds after power is removed. This makes it ideal for applications that require an on/off indication, such as power on/off indication, system failure indication, or alarm indication. The SML-A12DTT86J is also designed to be energy efficient, consuming only a few milliwatts of power when powered on. This makes it an ideal choice for applications where power consumption is a concern.

The SML-A12DTT86J is a reliable, energy efficient, and cost-effective option for discrete LED indication applications, such as power on/off indications and system status markings. Its wide operating temperature range, high level of resistance to shock and vibration, and ultra-low power consumption make it an ideal choice for any application that requires visibility even in dark environments.

The specific data is subject to PDF, and the above content is for reference