SN65HVD1040QDRQ1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SN65HVD1040QDRQ1 is a commonly used RS-485 transceiver chip that provides an interface for the transmission of data between two points. It is one of the most popular choices for interfacing with industrial and automotive sensors, serial networks, and other systems. The device utilizes differential signaling to provide a highly reliable method of transmission.

The SN65HVD1040QDRQ1 is used in a variety of communication applications and is classified as an interface - drivers, receivers, transceivers. The device is capable of transmitting and receiving differential data over a wide range of baud rates, from 9600 up to 1Mbps. It is commonly used in environments where data is transmitted over long distances or must be reliably maintained.

This device is designed to work with two different voltage levels, 5V and 3.3V. It can operate in either half or full duplex modes. In half-duplex mode, data is sent over a single wire with one wire being used for transmit and the other for receive. In full-duplex mode, both wires are used for the transmission of data. The device has an adjustable receiver sensitivity for increased robustness.

The SN65HVD1040QDRQ1 also provides two open-collector driver outputs. These driver outputs are designed to drive high-current loads, such as relays and motors, with the device providing a low-impedance connection to the power supply. The device also offers slew rate control, allowing it to reduce electromagnetic radiation and reduce noise.

This device is designed to operate in a wide range of temperatures and has over-temperature protection. The device can operate at temperatures of up to 85C and has a maximum total ambient temperature of 125C. The device also features noise immunity owing to its differential signaling technology, allowing it to work in noisy environments.

In summary, the SN65HVD1040QDRQ1 is a commonly used RS-485 transceiver chip used for the transmission of data between two points. It is classified as an interface - drivers, receivers, transceivers and provides an adjustable receiver sensitivity for increased robustness. The device operates over a wide range of baud rates and provides two open-collector driver outputs for the driving of high-current loads. It also provides slew rate control and noise immunity owing to its differential signaling technology.

The specific data is subject to PDF, and the above content is for reference