SN74AUCH16374GQLR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74AUCH16374GQLR is a product from Texas Instruments which belongs to their Logic - Flip Flops product family. The SN74AUCH16374GQLR is a 16-bit non-inverting D-type flip-flop with open drain outputs. The device is suitable for asynchronous operation, and D-type latches can be driven from the same clock or data line for true data synchronization.

The SN74AUCH16374GQLR has wide range of applications. It can be used to store, buffer and transfer data between multiple devices. It is also suitable for use in address decoding and data regeneration and can be used in serial-to-parallel conversion.

The SN74AUCH16374GQLR combines clocked logic with FETs. This contributes to its low power consumption, making the device suitable for a wide range of battery-powered applications. The device can also control two, three and four-state output schemes.

The working principle of the device is based on NCV logic. The logic consists of a clocked logic element, which stores the data in a latch when it receives a clock signal. This latch is further connected to an N-type FET, which is used for output logic. The logic of the output signal is determined by the data stored in the latch.

The output of the device is open-drain, meaning that the outputs can be wire-OR\'d together. This can be useful for setting up data buses as it simplifies the setup by allowing multiple drivers to be used to drive the bus. The open drain outputs also provide the ability to connect other circuits, such as buffers, on the output side of the device, making it possible to optimize the device for the particular application.

The SN74AUCH16374GQLR has a wide selection of power supply voltage options, ranging from 4.5 volts to 5.5 volts. The device has a maximum clock frequency of 400 kHz, making it suitable for use in high-speed applications. The device also features an active low reset, allowing it to be used to reset and initialize multiple devices.

In summary, the SN74AUCH16374GQLR is a 16-bit non-inverting D-type flip-flop with open drain outputs. It is designed for low power consumption, making it suitable for a wide range of battery-powered applications. It also boasts a wide range of power supply voltage options and a maximum clock frequency of 400 kHz. It combines clocked logic with FETs and has an active low reset, allowing it to be used to reset and initialize multiple devices. Thus, the SN74AUCH16374GQLR is the perfect device for applications such as data storage, data buffering, address decoding and data regeneration, serial-to-parallel conversion, and bus architecture.

The specific data is subject to PDF, and the above content is for reference