SN74F2373DBRE4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic - Latches

The logic latch is an electronic component used to hold a single bit of binary data. It is primarily used in memory and logic circuits. The SN74F2373DBRE4 is a dual, edge-triggered, three-state latch that has been designed to meet a wide range of applications. It has two individually controlled outputs and can be used in systems that require data to be stored and retrieved with minimal setup time. This capability makes the SN74F2373DBRE4 an excellent choice for data storage solutions. In addition, since it can store two bits of data simultaneously, it can be used in applications where a single bit of data is not enough to hold the desired state.

The SN74F2373DBRE4 is constructed from a set of six field-effect transistors (FETs) and four diodes. Each FET consists of a source, gate and drain, with three FETs connected in series, creating two independent stages for both output A and output B. The four diodes serve to provide a certain amount of hysteresis and reduce the amount of noise produced when the latch is operated. The latch can operate in both positive and negative edge-triggered modes and the three-state outputs can be used to facilitate the latch’s communication with other components.

The operation of the SN74F2373DBRE4 is quite simple. In positive edge-triggered mode, when a signal is applied to the latch\'s input, it will set the outputs (A and B) to their respective states. The outputs will then remain in this state until a signal is applied to the input at the next positive edge, at which point the outputs will be reset to their original states. In negative edge-triggered mode, the process is the same, except that the signals are applied at the negative edge of the input signal.

The SN74F2373DBRE4 is an ideal component for applications that require data to be stored and retrieved quickly such as in CPUs, handheld devices, and digital signal processing. It can also be used in digital logic circuits such as adders, subtractors, and accumulators. In addition, the three-state outputs make the SN74F2373DBRE4 a great choice for applications where multiple data bits need to be stored and retrieved with minimal setup time.

The SN74F2373DBRE4 is a simple, yet reliable latch that is capable of storing and retrieving data quickly. Its compatibility with both positive and negative edge-triggered systems and its three-state outputs make it an excellent choice for applications requiring rapid and reliable data exchange. It is a great component for memory and logic circuits that require data to be stored and retrieved quickly.

The specific data is subject to PDF, and the above content is for reference