SN75ALS160DWG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN75ALS160DWG4 is an integrated circuit interface device belonging to the large family of drivers, receivers, and transceivers. It is mostly used in application fields needing to transfer digital signals among different devices owning different form factors, such wires, cables, and connectors. It offers the possibility of combining digital and analog signals within the same chip so that multiple devices can be connected.Basically, this device works as a bridge between two or more devices, allowing to transfer digital signals from one to another with no losses, creating a powerful and reliable connection. It serves as a “translator” from one form of signal to another, allowing for the intercommunication between many devices, be it cables or wires.Specifically, the SN75ALS160DWG4, contains two pins: the input, which receives the digital information to be transferred, and the output, which distributes it among the associated devices. The device also includes a built-in highway to control the timing and delay between sending the information and receiving the response, the “read-write delay”.In order to work, the device needs to be powered with a voltage through the VCC pin, usually between 4.50V and 5.5V in continuous operation. Then, the input data must be fed in the Data Input pin. This is where the information to be transferred is stored. The device will process the data and transfer it through the Data Output pin to the associated devices and start the read-write delay, before the data is accepted by them.The device is capable of delivering the data to the output devices with maximum speeds of 70 Mbps, allowing the transfer of digital information from a controlling device to multiple receivers at a fast rate.It is important to note that, depending of the configuration, the total connection between the sender and the receivers must be within a total cable length of 5 meters, otherwise the information might travel along the wire too slowly and it will be distorted.The SN75ALS160DWG4 device comes with many features that help to deliver the data reliably and quickly to the target devices. For example, it has an amplifier which helps to boost the signal quality, allowing to transfer the data at greater distances. This amplifier is enabled using an Enable/Disable pin.The device also includes diagnostic functions, implemented with an LEDs which indicate failure and good operation, as well as “handshaking” protocols, this is, the exchange of information between the driver and the receiver to ensure that the data was delivered, and can be used for error correction and other processes.The SN75ALS160DWG4, is a powerful and reliable interface device, which serves as a bridge between multiple digital signal buses, to allow the transmission and reception of digital data. It is very easy to use and provides a reliable connection between devices, allowing the seamless integration of digital signal in multiple systems.

The specific data is subject to PDF, and the above content is for reference