SP3222EBCT-L/TR

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Obsolete
Type:	Transceiver
Protocol:	RS232
Number of Drivers/Receivers:	2/2
Duplex:	Full
Receiver Hysteresis:	300mV
Data Rate:	250kbps
Voltage - Supply:	3 V ~ 5.5 V
Operating Temperature:	0°C ~ 70°C
Mounting Type:	Surface Mount
Package / Case:	18-SOIC (0.295", 7.50mm Width)
Supplier Device Package:	18-SOIC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The SP3222EBCT-L/TR is an integrated circuit (IC) designed to be used in digital and analog data transmission applications, such as Ethernet and UART interfaces. It is a 3.3V level, low-power transceiver with an integrated driver and receiver. It is a RTOS that can transmit and receive up to 13Mbps(13 Mbits/sec) over a single line and provides a variety of signal integrity features, like signal conditioning and voltage translation.

Application Field

The SP3222EBCT-L/TR has been designed to meet the needs of a wide range of applications, including data transmission, signal conditioning, and voltage translation. It can be used in many communication protocols such as Ethernet, USB, I2C, and UART, as well as in industrial automation, automotive, and consumer applications.The low-power transceiver can be used to build communication links between two devices, allowing a full-duplex(\in symmetric) or half-duplex(\or asymmetric) transmission from one device to another. Its signal conditioning features include equalization and dis-equalization, allowing the transmitter to send signals over a longer physical distance. The voltage translator is designed to translate low-voltage logic signals to a higher logic level (up to 5V) if needed, as well as to translate different voltage levels between the two devices, if desired.

Working Principle

The working principle of the SP3222EBCT-L/TR is based on the electronic principles of transistors and MOSFETS. Transistors are used to amplify a signal, while MOSFETS are used to turn the transistor on or off. The transceiver is made up of a transmitter and a receiver.In the transmitter, the input voltage is amplified by the transistors, and the output is then sent to the channel. The channel is connected to the receiver. The received signal is then amplified by the MOSFETs and the output is sent back to the transmitter. The protocol signals are then passed between the two devices.In order to ensure quality signal transmission, the transceiver is also equipped with a variety of signal conditioning features. These features include equalization and dis-equalization, adaptive equalization, power-down, and pre-emphasis. Equalization and dis-equalization are used to compensate for signal losses due to the physical distance between the two devices, while adaptive equalization is used to reduce the amount of distortion caused by voltage reflections. Power-down is used to reduce power consumption when the line is not in use, while pre-emphasis is used to reduce distortion by exaggerating high-frequency components of the signal.

Conclusion

In conclusion, the SP3222EBCT-L/TR is an IC designed for digital and analog data transmission applications. It is a low-power transceiver that can transmit and receive up to 13Mbps. It also features a variety of signal conditioning features, such as equalization and dis-equalization, adaptive equalization, power-down, and pre-emphasis. The SP3222EBCT-L/TR can be used in a variety of applications, including data transmission, signal conditioning, and voltage translation.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description