ST13007D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ST13007D is a bipolar junction transistor that is used for a variety of applications, such as amplifiers, audio signal and power switching. It is a single-transistor device that uses both NPN and PNP type structures. This transistor is generally preferred for low power applications because it has a low current gain characteristic and its sound output is generally softer than other transistors. This transistor has a higher saturation voltage and a higher transistor input current for a given voltage. However, its lower gain characteristic and its relatively low breakdown voltage can result in higher power dissipation.

The ST13007D is a unipolar-gate transistor; it consists of a single NPN transistor connected between a PNP transistor and a NPN transistor. As a result, it has a higher input impedance, higher saturation voltage and a lower distortion level than transistors with polar gate structure. The single-transistor structure also has a shorter switching time, allowing it to be used in certain applications where speed is an important factor.

Since the PNP and NPN transistors are connected in series, the ST13007D can be used for power switching applications. It can be used to directly switch on and off any DC voltage supply. This transistor can also be used to switch AC voltage supplies and is preferred for this application because of its lower on-resistance and higher switching speed. In addition, the ST13007D can be used as a buffer to ensure that the power supply is regulated, as well as a control switch in power electronics circuits.

The ST13007D\'s working principle is based on the junction voltage drop. When the voltage of the base is greater than the emitter voltage, the NPN transistor is turned on and a current starts to flow from the base to the emitter. However, if the voltage of the base is less than the emitter voltage, then the NPN transistor is turned off and no current will flow from the base to the emitter. When the NPN transistor is turned off, the PNP transistor is also turned off. As a result, the collector-emitter voltage is prevented from reaching the breakdown voltage and the power supply is regulated.

The ST13007D has a maximum collector current of 1A and a maximum collector-emitter voltage of 30V. Its input impedance is around 2.6kΩ and its output impedance is around 15.6kΩ. Its power dissipation is typically 4 Watts and its peak gain is around 65dB. It has a good heat dissipation capability and its maximum thermal resistance is around 68°C/W.

The ST13007D is widely used in a variety of applications, such as audio amplifiers, radio frequency power switching, and power supply regulation. Its low current gain capability and its relatively low breakdown voltage make it an attractive choice for low power applications. Moreover, its single-transistor structure makes it an ideal choice for applications where speed is an important factor. It is a reliable and versatile device that can handle up to 1A of collector current and 30V of collector-emitter voltage.

The specific data is subject to PDF, and the above content is for reference