TLC3702IDG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TLC3702IDG4 is part of the low-power, single-supply, C-MOS comparator family that is specifically designed to provide a low-power, cost-efficient solution to precision level-detection applications. This comparator type is commonly used in Linear - Comparators applications such as sample-and-hold circuits and timers. The current (I/O) features of the TLC3702IDG4 make it suitable for use in low-power circuits such as those used in industrial and medical devices.

The TLC3702IDG4 operates with a single positive supply range from 3.0V to 6.0V with a 5V hysteresis input range. It operates with a low-power current of 2mA max, and it offers improved thermal performance. Also, its minimum guaranteed input offset voltage is 0.1mV with a high common-mode rejection ratio of -100dB from 2.7 to 2.8V. It includes both TTL and CMOS logic compatibility and high-speed operation.

The TLC3702IDG4 is a single-operational comparator integrated circuit that uses external inputs called non-inverting (V+) and inverting (V-) inputs to produce a high or low output signal. Its high and low outputs are connected to the VDD and GND, respectively. The TLC3702IDG4 also features a push-pull output stage that consists of a TTL/CMOS compatible NAND gate. The output’s logic is determined by the logic states of the comparator’s inputs.

The TLC3702IDG4 is built from several stages: 2 CMOS AND gates, 5 CMOS inverters, 2 LC stages, and two push-pull output drivers. The two CMOS AND gates form the differential amplifier section of the TLC3702IDG4. This differential amplifier has two inputs, the non-inverting (V+) and the inverting (V-), and one output. This output is fed to the two LC stages, which act as the gain stages for the differential amplifier. The gain is determined by the output characteristics of the LC oscillator. This output is then sent to the two CMOS inverters and outputs either a ‘high’ or ‘low’ signal, depending on the inputs.

The output signal of this comparator is then sent to the two push-pull output drivers. The output of the first driver is then sent to the TTL/CMOS compatible NAND gate, which then introduces hysteresis to the signal. The second driver acts as the non-inverting output. All outputs feature impedance levels that remain the same regardless of the VDD voltage, ensuring the signal quality and allowing the device to be used in a wide range of applications.

The TLC3702IDG4 is a single-supply comparator integrated circuit that is well-suited for low-voltage, low-power applications, such as timers and sample-and-hold circuits. Its high common-mode rejection ratio and low-power capabilities make it an ideal solution for industrial, medical, and consumer markets. The TLC3702IDG4 is an example of the evolution of precision level-detection applications and demonstrates how a single-supply comparator integrated circuit can provide an economical and efficient solution for such applications.

The specific data is subject to PDF, and the above content is for reference