TLV2474AQDRG4Q1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TLV2474AQDRG4Q1 is a chip in the Instrumentation, OP Amps, and Buffer Amps linear-amplifier category. With a slew rate of 1.5 V/μs, it provides high-speed performance, as well as robust input and output protection.

The TLV2474AQDRG4Q1\'s main application is in industrial control and monitoring systems, where it is commonly used to amplify the low-level signals that control or measure a system\'s overall performance. Its low noise, low-power design and high-speed performance make it ideal for off-line power supplies, as well as for driving active filters andpulse-width modulators. In addition, the TLV2474AQDRG4Q1 is well suited for use in high-end medical equipment and instrumentation circuits.

The TLV2474AQDRG4Q1 has a wide input common-mode voltage range, from -3.3 to 6.0 V, which makes it suitable for single-supply operations. Furthermore, its low-power design offers a quiescent current of only 1 μA, and a device shutdown mode with a signal current of only 0.5 μA. This shutdown capability makes the TLV2474AQDRG4Q1 ideal for battery-powered applications.

The TLV2474AQDRG4Q1 distinguishes itself from other instrumentation amplifiers on account of its short-circuit protections. The device offers both input and output short-circuit protection beyond its rated output voltages, ensuring the device will not be damaged by any short conditions.

In addition to its short-circuit protection, the TLV2474AQDRG4Q1 features an internal power-on reset circuit to ensure its normal operation even in the event of power disturbances. This reset circuit also eliminates the need for any special control circuitry to reset the device after power is applied.

The TLV2474AQDRG4Q1 also has a wide range of options for connection configurations. It is available with either single-ended or differential input stages, as well as a variety of output configurations such as open-collector and push-pull outputs. Furthermore, its low-power design provides a propagation delay of only 130 ns, ensuring the device works well in high-speed applications.

TLV2474AQDRG4Q1 working principle is simple and straightforward. When power is applied, the device is enabled and the full input range is available. To amplify the input signal, the device uses two internal gain stages and an output stage, which provides the output voltage. The first gain stage is a non-inverting amplifier, which provides a large gain and small offset voltage. The gain of this stage is adjustable via an external resistor. The second gain stage is an inverting amplifier, which is followed by an output stage. The output stage can be configured as either a push-pull output or an open-collector output. The overall gain is determined by the external resistance and by the output stage configuration.

The TLV2474AQDRG4Q1 is a low-power, high-speed linear amplifier designed for industrial control and instrumentation applications. It features robust input and output protection, in addition to its low-noise, low-power design and wide range of connection configurations. The device also offers a power-on reset circuit and a propagation delay of only 130ns, making it a good choice for high-speed applications.

The specific data is subject to PDF, and the above content is for reference