TS831-3IZ-AP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PMIC (Power Management Integrated Circuit) Supervisors are a type of latch-up circuit protection devices that are used to minimize power losses in integrated circuitry by managing voltage levels. They provide a stable voltage level to the circuit so that no damage from voltage fluctuations is caused. The TS831-3IZ-AP supervisor is a low-power, efficient integrated circuit that supervises the AT and ATX supplies in a system, ensuring that the power supply does not overload due to a large surge in system current. The TS831-3IZ-AP performs the typical supervisor tasks such as monitoring input voltage levels and maintaining the power supply load. The TS831-3IZ-AP supervisor utilizes an integrated dual-channel rail-to-rail voltage detector that is designed to target the +5V and -5V supply lines. It is programmed to detect two types of voltage conditions. The first detection is the under-voltage (UV) which occurs when the incoming voltage signal falls below the minimum specified voltage threshold. The second detection is the over-voltage (OV) which occurs when the incoming voltage signal exceeds the specified voltage threshold. The TS831-3IZ-AP is a PMOS-based device where the PMOS transistor is configured to pull up the voltage on the output signal port. The output voltage from the IC is generally programmed to be the same as the input UV or OV threshold voltage, depending on the condition of the input signal. When the UV or OV conditions are met, the PMOS transistor will be activated and the output voltage will be pulled up to a voltage that is suitable for the specific application. When an input signal is presented to the TS831-3IZ-AP supervisor, it will perform a digital-based ‘look’ at the system/environmental conditions in order to determine whether an under or over-voltage has been detected. If an over or under-voltage has been detected, the supervisor will then activate the internal PMOS transistor and pull the output voltage up to the pre-programmed voltage suitable for the specific application. Once the TS831-3IZ-AP supervisor has successfully performed the UV and OV detections, it will then send the output voltage back to its correct operating voltage. At this point, the supervisor will then return to its normal standby mode until the next voltage spike or low voltage condition is detected. The TS831-3IZ-AP supervisor is a low-power, reliable solution for monitoring the AT and ATX supplies in an integrated system. It is an effective, low-cost solution for limiting power losses that may be incurred due to an unexpected increase or decrease in supply voltage. It is also ideal for providing a stable voltage output to an integrated system, ensuring that the system’s components are not damaged due to a sudden voltage jump or decrease. The TS831-3IZ-AP is a reliable integrated circuit for controlling power supply voltage levels, providing reliable power supply protection.

The specific data is subject to PDF, and the above content is for reference