UGB1H1R5KHM1TO

Aluminum electrolytic capacitors are passive components that store and release electrical energy. They consist of two metal electrodes separated by an electrolytic solution – a medium containing positively and negatively charged ions. The positive electrode is usually in the form of an anode, which is typically made of aluminum or a similar metal. The negative electrode is typically made of a metallic foil such as copper or titanium.

The UGB1H1R5KHM1TO capacitor is a high-performance, multi-layer aluminum electrolytic capacitor used in a variety of applications. It is used for smoothing electrical supply in switch mode power supply (SMPS) devices, as well as decoupling and filtering signals in a wide range of applications. It has a rated capacitance range from 0.47 to 680µF, temperature range from -55°C to +105°C, and a rated voltage range from 2.5 V to 650 V.

The UGB1H1R5KHM1TO is a one-sided electrolytic capacitor that works via dielectric anodization. This means that a thin, insulating layer of oxide is formed on the aluminum anode and cathode, resulting in a higher capacitance-to-volume ratio. This is advantageous in applications where capacitor size is a concern. The UGB1H1R5KHM1TO also offers high performance in terms of its low ESR (equivalent series resistance), a measure of how quickly a capacitor can transfer electrical energy.

The working principle of the UGB1H1R5KHM1TO capacitor is relatively straightforward. When a voltage is applied across the terminals of the device, a current will pass through the electrolyte medium and build up on the anode and cathode surfaces. This leads to an increase in the capacitance value, forming an electric field with the charges on the electrode plates. The capacitance value between the two plates will remain stable, regardless of the amount of current passing through them.

The UGB1H1R5KHM1TO capacitor is suitable for a wide range of applications, and is especially useful for filtering and smoothing high-frequency signals in order to reduce noise and improve the performance of a system. It is also widely used in radio frequency (RF) circuits, as well as power supply circuits such as voltage regulators and switch mode power supplies. The device is also often used as a bypass capacitor – a capacitor designed to bypass AC interference and reduce the amount of capacitive reactance in a circuit. This allows the capacitor to reduce the voltage ripple, improving the power factor and efficiency of the circuit.

In conclusion, the UGB1H1R5KHM1TO capacitor is an advanced aluminum electrolytic capacitor with high performance, and is suitable for use in a variety of applications. Its high capacitance-to-volume ratio and low equivalent series resistance make it a great choice for power supply and signal filtering applications.