UHE1J122MHD6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are one of the most widely used elements in electronic circuit designs due to their low cost and high energy density. The UHE1J122MHD6 is a type of aluminum electrolytic capacitor, and is quite commonly used in a variety of applications. This article will discuss the application field and working principle of this component.

The UHE1J122MHD6 is a snap-in aluminum electrolytic capacitor, designed and manufactured by TDK Corporation. It is intended for use in AC applications with an operating voltage of 450VAC, and is most commonly used in power supply systems, low-frequency circuits and harmonic filters. It has a capacitance of 10µF, and is a bipolar type with both polarities on the same side. The size of the capacitor is 31.5mm long and 14.5mm wide.

In terms of working principle, the UHE1J122MHD6 is an electrolytic capacitor, which means it has two electrodes separated by a polarized dielectric material. The dielectric material consists of an oxide layer formed on the aluminum electrodes. This layer contains ions, which can move to create an electric field between the two terminals of the capacitor. When a voltage is applied across the terminals, the electric field between the two electrodes increases, resulting in the capacitance of the component increasing.

The UHE1J122MHD6 also has a self-healing feature, which is one of the greatest advantages of aluminum electrolytic capacitors over other types. This means that in the case of an overload or a short circuit, the capacitance of the component is not permanently damaged, but rather is restored to its original level. This makes the component very reliable in applications where failure might be dangerous or expensive.

The UHE1J122MHD6 is also a long-lasting component, with an expected life of more than 10,000 hours at its maximum operating temperature of 105°C. This is substantially higher than most other types of capacitors, making it an ideal choice for applications that require lasting reliability.

To summarize, the UHE1J122MHD6 is a snap-in aluminum electrolytic capacitor, designed and manufactured by TDK Corporation, which is intended for use in AC applications with an operating voltage of 450VAC. It has a capacitance of 10µF, is a bipolar type and has a self-healing feature. It is commonly used in power supply systems, low-frequency circuits and harmonic filters, as well as in any application that requires lasting reliability due to its expected life of 10,000 hours at its maximum operating temperature of 105°C.

The specific data is subject to PDF, and the above content is for reference