UHE1J561MHD6TN

Series:	UHE
Packaging:	Tape & Reel (TR)
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Capacitance:	560µF
Tolerance:	±20%
Voltage - Rated:	63V
ESR (Equivalent Series Resistance):	--
Lifetime @ Temp.:	10000 Hrs @ 105°C
Operating Temperature:	-40°C ~ 105°C
Polarization:	Polar
Ratings:	--
Applications:	General Purpose
Ripple Current @ Low Frequency:	1.013A @ 120Hz
Ripple Current @ High Frequency:	1.14A @ 100kHz
Impedance:	73 mOhms
Lead Spacing:	0.295" (7.50mm)
Size / Dimension:	0.630" Dia (16.00mm)
Height - Seated (Max):	1.063" (27.00mm)
Surface Mount Land Size:	--
Mounting Type:	Through Hole
Package / Case:	Radial, Can

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<h1> Aluminum Electrolytic Capacitors </h1><p>Aluminum electrolytic capacitor, also known as “electrolytic capacitors” or “electrolytic capacitance”, is a type of polished aluminum foil coated with an oxide surface and covered by a plastic blend or forming anode material that functions as a dielectric. These capacitors usually have a higher capacitance-to-volume ratio than traditional capacitors. There are two primary types of aluminum electrolytic capacitors – axial and radial leaded. Each type may be offered in a product with non-polarized or polarized construction. </p><p>The UHE1J561MHD6TN is a high-quality aluminum electrolytic capacitor designed for reliable operation in a wide range of applications. The UHE1J561MHD6TN has an axial leaded construction with non-polarized design and is rated at 350VDC, 1.560000μF, 6.29mm diameter, and 15.8mm length.</p><h2>Application Field</h2><p>The UHE1J561MHD6TN is ideal for use in a variety of applications where high capacitance and reliable operation is important. This aluminum electrolytic capacitor is ideal for low-frequency audio applications, such as speakers and amplifiers, as well as power supply and motor control circuits. Additionally, this device is frequently used for filtering and timing applications.</p><h2>Working Principle</h2><p>The UHE1J561MHD6TN aluminum electrolytic capacitor works by storing electrical charge on a pair of conductive plates (the anode and cathode) separated by a non-conductive dielectric material. One plate is made of aluminum foil, while the other of a porous material that is saturated with an electrolyte. When the electrodes are connected to a power source, a voltage is applied across the plates, causing electrons to enter one plate and leave the other. This process creates a charge buildup on the plates, which is effectively stored and released when the electrodes are disconnected.</p><p>The UHE1J561MHD6TN has two caps connected in parallel. Each cap has a dielectric that passes current by tunneling current. The caps are formed by a cylindrical anode and cathode that are separated by a dielectric. The anode is formed of an aluminum oxide film applied to the aluminum foil and the hole in the center of the foil acts as the cathode. The surface of the film is formed from a sheet of oxide on the anode aluminum.</p><p>The UHE1J561MHD6TN aluminum electrolytic capacitor is designed for low leakage current applications. Due to its non-polarized construction, it can be used in applications where the capacitance needs to remain balanced and symmetric during reverse voltage operation. The capacitance of the UHE1J561MHD6TN aluminum electrolytic capacitor is rated at 1.560000μF and it has a rated voltage of up to 350VDC.</p>

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description