UPV1H100MFD1TA

Series:	UPV
Packaging:	Tape & Box (TB)
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Capacitance:	10µF
Tolerance:	±20%
Voltage - Rated:	50V
ESR (Equivalent Series Resistance):	--
Lifetime @ Temp.:	5000 Hrs @ 105°C
Operating Temperature:	-55°C ~ 105°C
Polarization:	Polar
Ratings:	--
Applications:	General Purpose
Ripple Current @ High Frequency:	115mA @ 100kHz
Impedance:	2 Ohms
Lead Spacing:	0.197" (5.00mm)
Size / Dimension:	0.197" Dia (5.00mm)
Height - Seated (Max):	0.492" (12.50mm)
Surface Mount Land Size:	--
Mounting Type:	Through Hole
Package / Case:	Radial, Can

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors

Aluminum electrolytic capacitors are a type of capacitor which uses a metal oxide film or solid electrolyte as one of its dielectric layers. This results in a higher permittivity than other standard capacitors, which allows them to have a much higher capacitance in the same size. Aluminum electrolytic capacitors are a common choice for many high-power applications due to their high capacitance, small size, and low cost.The UPV1H100MFD1TA is a type of aluminum electrolytic capacitor specifically designed for telecommunications applications. It is used in power supplies, filters, and regulators in baseband, broadband, and high-speed networks, as well as other uses in RF and microwave frequency circuits. The UPV1H100MFD1TA is suitable for a wide range of requirements, including transient peak voltage requirements, high frequency performance, and high capacitance values.The construction of the UPV1H100MFD1TA consists of a metal-sealed foil unit which serves as the anode and is rolled around a cylindrical separator which serves as the cathode. This construction gives the UPV1H100MFD1TA a wide range of characteristics which make it ideal for telecommunications applications. The UPV1H100MFD1TA has an electrolyte layer which is a conductive oxide palladium layer, and a thin separator which is made from polyethylene, polypropylene, or fluorinated hydrocarbon polymers, depending on the requirements of the application. The anode also contains an aluminum foil which acts as the dielectric material and is wrapped around the cathode. All of these layers are encased in an epoxy resin polymer-based package, which protects the device from damage due to moisture, vibration, mechanical shock, and other environmental conditions.The working principle of the UPV1H100MFD1TA is simple. When an AC voltage is applied to the device, the metal oxide layer and the thin separator act as a dielectric and the current is conducted through the oxide layer, while the thin separator acts as an insulator. As a result, a charge is stored in the oxide layer, which is used to create the magnetic field when the voltage is released. This magnetic field is then used to increase the capacitance of the device.The UPV1H100MFD1TA has a wide range of applications in the telecommunications industry, including baseband, broadband, and high-speed networks, as well as in RF and microwave frequency circuits. In addition, it is suitable for use in power supplies, filters, and regulators, and is well suited for transient peak voltage requirements, high frequency performance, and high capacitance values.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description