UPW1J6R8MDD6TP Capacitors

Series:	UPW
Packaging:	Tape & Box (TB)
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Capacitance:	6.8µF
Tolerance:	±20%
Voltage - Rated:	63V
ESR (Equivalent Series Resistance):	--
Lifetime @ Temp.:	2000 Hrs @ 105°C
Operating Temperature:	-55°C ~ 105°C
Polarization:	Polar
Ratings:	--
Applications:	General Purpose
Ripple Current @ Low Frequency:	24mA @ 120Hz
Ripple Current @ High Frequency:	80mA @ 100kHz
Impedance:	3.5 Ohms
Lead Spacing:	0.059" (1.50mm)
Size / Dimension:	0.157" Dia (4.00mm)
Height - Seated (Max):	0.492" (12.50mm)
Surface Mount Land Size:	--
Mounting Type:	Through Hole
Package / Case:	Radial, Can

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to UPW1J6R8MDD6TP Aluminum Electrolytic Capacitor

Aluminum electrolytic capacitors, also known as "electrolytic caps," are widely used in AC and DC line filter, power rectification, and decoupling circuits in the electronics industry. UPW1J6R8MDD6TP aluminum electrolytic capacitors are one such type. This article will provide an overview of the application field and working principle of UPW1J6R8MDD6TP aluminum electrolytic capacitors.

Application Field

UPW1J6R8MDD6TP aluminum electrolytic capacitors are primarily used in power line filter circuits for AC and DC applications, frequency conversion power supplies, DC power rectification, and voltage stabilization and regulation. They are also commonly used as decoupling and filtering components in analog and digital circuits, as well as in power supply and signal amplifier circuits.In addition, UPW1J6R8MDD6TP aluminum electrolytic capacitors are also suitable for use in automotive, ship, and aircraft electronic devices, photovoltaic inverters, and renewable energy applications.

Working Principle

UPW1J6R8MDD6TP aluminum electrolytic capacitors are constructed from two aluminum foils that are insulated from each other by a thin dielectric oxide film. The two foils are then rolled up and sealed in an electrolyte-proof, leak-resistant container.When a voltage is applied between the two electrodes of the capacitor, the electric current causes an electric field to form in the dielectric film, which causes dielectric polarization to increase. This reduces the resistance of the dielectric material and increases the capacitance. The overall capacitance is a combination of both the active density of the dielectric material and the length and area of the aluminum foil. When the electric current across the terminals is reversed, the charge stored in the dielectric material is gradually released. This release of charge decreases the capacitance of the capacitor. However, the dielectric process is reversible, so after a certain period of time, the capacitance value will revert to its original state.

Conclusion

The UPW1J6R8MDD6TP aluminum electrolytic capacitor is a commonly used form of capacitor, mainly used in AC and DC line filter, power rectification, and decoupling circuits. These capacitors work by the buildup of electrostatic fields within the dielectric film, resulting in increased capacitance when a voltage is applied between the two electrodes. Despite their small size, these capacitors can store significant amounts of electrical energy, making them an important part of many electronics circuits.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description