UUG2D330MNQ1MS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors, also known as Electrolytic Capacitors (E-Cap) are typically used to store an electrical charge. These capacitors are made of a thin aluminum foil that is electrochemically etched with a very thin layer of oxide. The result is two separate electrical plates separated by an electrolyte.

The UUG2D330MNQ1MS is a type of aluminum electrolytic capacitor, sometimes referred to as a polarized capacitor due to the inherent polarity built into its design. This capacitor typically has a rated voltage of up to 16 volts, and is most commonly used in power supply circuits for applications that require high frequency ripple current capabilities.

The working principle of the UUG2D330MNQ1MS is fairly simple. When a voltage is applied across the capacitor, current flows through an thin oxide layer on one of the aluminum plates. This oxide layer acts as an insulator and thus the electrons can only move through the oxide layer on the other plate. This sets up an electric field which activates separate charges on each of the plates, allowing the capacitor to store electrical energy.

The UUG2D330MNQ1MS aluminum electrolytic capacitor is ideally suited for use in switching power supplies, frequency Synthesizers, and medical equipment. It can also be used to bypass or filter input signals in low-voltage differential signaling (LVDS), audio power amplifiers, and video capture cards.

Finally, the UUG2D330MNQ1MS capacitor has a broad range of environmental conditions that can be operated in. It has a temperature range of -40℃ to +85℃ and a wide range of relative humidity (40～85% RH). This makes it an ideal choice for use in outdoor applications and in other environments where the temperature, humidity or vibration may be a factor.

In conclusion, the UUG2D330MNQ1MS aluminum electrolytic capacitor is a high-quality device that is well suited for use in power supplies, medical equipment, audio power amplifiers, and other related applications that require high frequency ripple current capabilities. Its wide range of operating conditions makes it an ideal choice in areas where temperature and humidity may be a factor.

The specific data is subject to PDF, and the above content is for reference