UVR1J102MHD

Series:	UVR
Packaging:	Bulk
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Capacitance:	1000µF
Tolerance:	±20%
Voltage - Rated:	63V
ESR (Equivalent Series Resistance):	--
Lifetime @ Temp.:	2000 Hrs @ 85°C
Operating Temperature:	-40°C ~ 85°C
Polarization:	Polar
Ratings:	--
Applications:	General Purpose
Ripple Current @ Low Frequency:	1.3A @ 120Hz
Ripple Current @ High Frequency:	1.495A @ 10kHz
Lead Spacing:	0.295" (7.50mm)
Size / Dimension:	0.630" Dia (16.00mm)
Height - Seated (Max):	1.063" (27.00mm)
Surface Mount Land Size:	--
Mounting Type:	Through Hole
Package / Case:	Radial, Can

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic CapacitorsAluminum electrolytic capacitors are capacitors that contain an electrolyte, usually an aqueous solution. They are polarized capacitors with a rated voltage of up to several thousand volts and are an essential component of modern electronics. Aluminum electrolytic capacitors are among the most widely used capacitors in electronic circuits today.The UVR1J102MHD aluminum electrolytic capacitor is a very reliable general-purpose aluminum electrolytic capacitor with a voltage rating of 10 volts and a capacitance of 10,000 Microfarads. It has a radial design, a 5 mm diameter and a 20 mm length. The UVR1J102MHD is most commonly used in power supplies, television receivers, amplifiers, oscillators, and other electronic circuits requiring large capacitance values.The structure of the UVR1J102MHD is similar to that of other aluminum electrolytic capacitors. It employs aluminum foil as one of its electrodes. molten electrolyte is filled into the aluminum can body, which is composed of an anode aluminum foil, a separator, and a cathode aluminum foil. The aluminum electrolyte is typically composed of ethylene glycol, water and several other additives, such as tartaric acid, boric acid, and aluminum oxide.The working principle of the UVR1J102MHD is relatively straightforward. When a voltage source is connected in series with the capacitor, a charge flows from one of the electrodes to the other, thus creating an electric field. This electric field, combined with the molecular structure of the electrolyte, forms an electronic layer between the two electrodes, which acts as a bridge to stop any further charge flow (or electric current). Since the electric field created by the charge is proportional to the voltage applied, the amount of charge stored can be controlled by varying the applied voltage. This allows the capacitor to store and release energy according to the voltage applied.In summary, the UVR1J102MHD is a reliable general-purpose aluminum electrolytic capacitor with a voltage rating of 10 volts and a capacitance of 10,000 Microfarads. It is most commonly used in power supplies, television receivers, amplifiers, oscillators, and other electronic circuits requiring large capacitance values. Its working principle is relatively straightforward, where the electric field combined with the molecular structure of the electrolyte forms an electronic layer between the two electrodes, which acts as a bridge to stop any further charge flow.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description