V23100V4315B010

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Reed relays are electrical devices that act as switches in various fields of application, and the V23100V4315B010 is one type of reed relay. A reed relay uses a type of electromagnet called a solenoid to act upon a contact that is made from a specialized “soft” metal called a reed. This contact moves inside of a tube when it is energized, and it can be used to either open and close a connection as needed.

V23100V4315B010 reed relays are used in the direct type of application to switch low-voltage signals—such as those from LEDs, logic circuits, and opto-isolators. These relays are small and require much less energy to operate than an electromagnetic relay, making them ideal for applications that require frequent and repetitive switching. They are reliable, operate quietly, and are typically good for about one million switching cycles. Additionally, the contacts used in these relays do not emit sparks when they open and close, so they can be used in confined spaces.

When it comes to powering and controlling the V23100V4315B010 reed relay, it is powered externally. This means that the station controlling the relay handles the power supply for the relay using two separate voltages: one for the coil (VCOIL) and one for the contact (VCONT). In order to energize the relay, a small voltage needs to be supplied to the coil, typically between 5 and 10 volts. When this voltage is applied, a magnetic field is created, causing the metal reed to move and open or close the contact in response, depending on the type of contact being used.

In applications that require a remote signal to be sent, such as in automotive applications, radio frequency control (RFC) can be used to switch the relay on and off. Radio frequency control works by sending a signal from a receiver coil that changes the magnetic field around a control circuit, and this in turn causes the metal reed to move and close the circuit. This is a great way to control the relay from a distance, making it much easier to use in applications that require remote operation.

In summary, the V23100V4315B010 reed relay is a type of electrical device used in a variety of applications to switch low-voltage signals. These relays are very small, quiet, and reliable, and they can be used for up to one million switching cycles. They require a small amount of voltage to be applied to the coil in order to energize the relay and switch the contact, but radio frequency control can also be used for remote operations. The reed relay is a great choice for applications that require frequent and repetitive switching at low voltages.

The specific data is subject to PDF, and the above content is for reference